TSC series carbide long neck square end mill, 4-flute / long neck model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
Konfigurierbar in [Schneidenlänge] 1.5 - 10 mm / [Schneidendurchmesser] 1 - 6 mm / [Durchmessertoleranz] 0 mm / [Halslänge] 4 - 50 mm / [Halsdurchmesser] 0.95 - 5.8 mm
Die Schaftfräser von MISUMI wurden konzipiert, um eine exakte Konturbearbeitung, schnelles Fräsen und die effektive Zerspanung unterschiedlichster Materialien zu ermöglichen. Dank einer Schneidenlänge von 1.5 bis 10 mm erlauben sie sowohl präzise als auch effiziente Arbeitsvorgänge, selbst bei anspruchsvollen Aufgaben. Dank des Schneidendurchmessers von 1 bis 6 mm sorgen diese Schaftfräser für exakte Maßhaltigkeit und konstante Fertigungsqualität. Die Halslänge misst 4 bis 50 mm, während der Halsdurchmesser 0.95 bis 5.8 mm beträgt.
Herstellerdetails:
[Merkmale]
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Kann die optimale Körperlänge für die Bearbeitung tiefer Teile des Werkstücks auswählen
-Optimal für die Bearbeitung im niedrigen bis mittleren Drehbereich aufgrund des universellen 30°-Spiralwinkels
-Ist mit einer Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte ausgestattet und erreicht eine lange Lebensdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
- TS
- General Steel
- 4 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
32.72 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 16.75 | 17.58 | 19.53 | 21.97 | |
54.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.3 | 1.9 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.25 | 6.28 | 6.59 | 7.32 | 8.24 | |
54.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.3 | 1.9 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.25 | 10.47 | 10.99 | 12.21 | 13.73 | |
23.30 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 6.28 | 6.59 | 7.32 | 8.24 | |
30.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 8.38 | 8.79 | 9.76 | 10.98 | |
30.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 10.47 | 10.99 | 12.21 | 13.73 | |
30.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 14.66 | 15.39 | 17.09 | 19.22 | |
21.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 6.28 | 6.59 | 7.32 | 8.24 | |
24.94 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 8.38 | 8.79 | 9.76 | 10.98 | |
21.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 10.47 | 10.99 | 12.21 | 13.73 | |
24.94 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 12.57 | 13.19 | 14.65 | 16.48 | |
24.94 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 14.66 | 15.39 | 17.09 | 19.22 | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 16.75 | 17.58 | 19.53 | 21.97 | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 18 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 18.85 | 19.78 | 21.97 | 24.71 | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 20.94 | 21.98 | 24.41 | Without Interference | |
30.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 6.28 | 6.59 | 7.32 | 8.24 | |
23.30 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 8.38 | 8.79 | 9.76 | 10.98 | |
30.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 10.47 | 10.99 | 12.21 | 13.73 | |
31.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 12.57 | 13.19 | 14.65 | 16.48 | |
30.92 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 14.66 | 15.39 | 17.09 | 19.22 | |
35.68 € | 1 | Verfügbar | 5 Arbeitstage | 1.7 | 2.5 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.65 | 6.28 | 6.59 | 7.32 | 8.24 | |
29.24 € | 1 | Verfügbar | 5 Arbeitstage | 1.7 | 2.5 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.65 | 16.75 | 17.58 | 19.53 | 21.97 | |
21.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 6.28 | 6.59 | 7.32 | 8.24 | |
28.99 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 8.38 | 8.79 | 9.76 | 10.98 | |
23.30 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 10.47 | 10.99 | 12.21 | 13.73 | |
28.99 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 12.57 | 13.19 | 14.65 | 16.48 | |
28.99 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 14.66 | 15.39 | 17.09 | 19.22 | |
23.30 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 16.75 | 17.58 | 19.53 | Without Interference | |
28.99 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 20.94 | 21.98 | 24.41 | Without Interference | |
48.55 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 26.18 | 27.47 | 30.51 | Without Interference | |
26.90 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 6.28 | 6.59 | 7.32 | 8.24 | |
25.22 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 8.38 | 8.79 | 9.76 | 10.98 | |
22.63 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 10.47 | 10.99 | 12.21 | 13.73 | |
21.18 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 12.57 | 13.19 | 14.65 | 16.48 | |
22.35 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 14.66 | 15.39 | 17.09 | 19.22 | |
22.15 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 16.75 | 17.58 | 19.53 | Without Interference | |
29.03 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 18 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 18.85 | 19.78 | 21.97 | Without Interference | |
23.35 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 20.94 | 21.98 | 24.41 | Without Interference | |
26.65 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 26.18 | 27.47 | Without Interference | Without Interference | |
31.66 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 30 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 31.41 | 32.97 | Without Interference | Without Interference | |
29.03 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 8.38 | 8.79 | 9.76 | 10.98 | |
23.07 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 12.57 | 13.19 | 14.65 | Without Interference | |
24.51 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 16.75 | 17.58 | 19.53 | Without Interference | |
29.03 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 20.94 | 21.98 | Without Interference | Without Interference | |
29.51 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 26.18 | 27.47 | Without Interference | Without Interference | |
39.42 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 8.38 | 8.79 | 9.76 | 10.98 | |
30.11 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 12.57 | 13.19 | 14.65 | 16.48 | |
31.32 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 16.75 | 17.58 | 19.53 | 21.97 | |
31.32 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 20.94 | 21.98 | 24.41 | 27.46 | |
31.06 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 26.18 | 27.47 | 30.51 | Without Interference | |
39.17 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 30 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 31.41 | 32.97 | 36.62 | Without Interference | |
52.75 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 100 | 40 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 41.88 | 43.96 | Without Interference | Without Interference | |
45.15 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 5.5 | 6 | 70 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.35 | 16.75 | 17.58 | 19.53 | 21.97 | |
33.90 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 5.5 | 6 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.35 | 26.18 | 27.47 | 30.51 | Without Interference | |
45.84 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 5.5 | 6 | 100 | 35 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.35 | 36.65 | 38.46 | Without Interference | Without Interference | |
36.24 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 6 | 6 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.8 | 12.57 | 13.19 | 14.65 | 16.48 | |
35.77 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 6 | 6 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.8 | 16.75 | 17.58 | 19.53 | Without Interference | |
35.68 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 6 | 6 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.8 | 20.94 | 21.98 | 24.41 | Without Interference | |
35.41 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 6 | 6 | 70 | 30 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.8 | 31.41 | 32.97 | Without Interference | Without Interference | |
36.01 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 6 | 6 | 100 | 35 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 3.8 | 36.65 | 38.46 | Without Interference | Without Interference |
Loading...
Spezifikationen
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||
| 1 | 4 | ● | ● | 1.5 | 0.95 | 50 | 4 | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 1.2 | 6 | ● | ● | 1.8 | 1.15 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 1.3 | 6 | No Standards | ● | 1.9 | 1.25 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 1.4 | 6 | No Standards | ● | 2.1 | 1.35 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||
| 1.5 | 6 | ● | ● | 2.3 | 1.45 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||
| 1.6 | 6 | No Standards | ● | 2.4 | 1.55 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 1.7 | 6 | No Standards | ● | 2.5 | 1.65 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 1.8 | 6 | No Standards | ● | 2.7 | 1.75 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 2 | 6 | ● | ● | 3 | 1.95 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 2.5 | 8 | ● | ● | 3.8 | 2.4 | 50 | 4 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | Without Interference | Without Interference | |||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||
| 3 | 8 | No Standards | ● | 4.5 | 2.9 | 50 | 6 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | ● | ● | 70 | 16.75 | 17.58 | 19.53 | 21.97 | |||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||
| 40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||
| 3.5 | 16 | No Standards | ● | 5.5 | 3.35 | 70 | 6 | 16.75 | 17.58 | 19.53 | 21.97 | 1 |
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||
| 4 | 12 | No Standards | ● | 6 | 3.8 | 50 | 6 | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||
| 40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||
| 5 | 16 | ● | ● | 7.5 | 4.8 | 70 | 6 | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||
| 50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||
| 6 | 20 | ● | ● | 9 | 5.8 | 70 | 6 | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||
| 50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
Model Number
LN-TSC-PEM4S (Sharp Edge / Manufactured Product) / EM4S (Standard / Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure |
| 1.5 | 8 ~ 20 | ● | ● | 3 | 1.45 | 40 | 4 | 3 |
| 2 | 9 ~ 21 | ● | ● | 4 | 1.95 | 40 | 4 | 3 |
| 2.5 | 10 ~ 22 | ● | ● | 5 | 2.4 | 40 | 4 | 3 |
| 3 | 11 ~ 21 | ● | ● | 6 | 2.9 | 45 | 6 | 3 |
| 3.5 | 12 ~ 22 | ● | ● | 7 | 3.3 | 45 | 6 | 3 |
| 4 | 13 ~ 23 | ● | ● | 8 | 3.8 | 45 | 6 | 3 |
| 5 | 15 ~ 25 | ● | ● | 10 | 4.8 | 45 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining. 
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Geometry
- Sharp Corner
- Mit Führung
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Ausführung
- LN-TSC-EM4S
- LN-TSC-PEM4S
- TSC-EM4LB
- TSC-PEM4LB
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.