TSC series carbide long neck square end mill, 2-flute / long neck model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
Konfigurierbar in [Schneidenlänge] 0.2 - 10 mm / [Schneidendurchmesser] 0.1 - 6 mm / [Durchmessertoleranz] 0 mm / [Halslänge] 0.3 - 60 mm / [Halsdurchmesser] 0.085 - 5.8 mm
Speziell entwickelt für präzise Konturbearbeitung, Hochgeschwindigkeitsfräsarbeiten und eine effiziente Zerspanung verschiedener Werkstoffe, überzeugen die Schaftfräser von MISUMI durch ihre Vielseitigkeit. Mit einer Schneidenlänge von 0.2 bis 10 mm ermöglichen sie eine präzise und wirksame Bearbeitung, selbst bei komplexen Anwendungen. Aufgrund des Schneidendurchmessers von 0.1 bis 6 mm gewährleisten diese Schaftfräser präzise Maßgenauigkeit und eine gleichbleibende Produktionsqualität. Die Halslänge beträgt 0.3 bis 60 mm bei einem Halsdurchmesser von 0.085 bis 5.8 mm.
Herstellerdetails:
[Merkmale]
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Kann die optimale Körperlänge für die Bearbeitung tiefer Teile des Werkstücks wählen
-Optimal für die Bearbeitung im niedrigen bis mittleren Rotationsbereich aufgrund des universellen 30°-Schrägungswinkels
-Es hat eine Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte und erreicht eine lange Nutzungsdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
- TS
- General Steel
- 2 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
51.66 € | 1 | Verfügbar | 5 Arbeitstage | 0.8 | 1.2 | 4 | 70 | 20 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 20.94 | 21.98 | 24.41 | 27.46 | 10° | |
57.39 € | 1 | Verfügbar | 5 Arbeitstage | 0.8 | 1.2 | 4 | 70 | 24 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.76 | 25.13 | 26.38 | 29.29 | Without Interference | 10° | |
22.80 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 1.35 | 4 | 50 | 4 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
24.69 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 1.35 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
25.17 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 1.35 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
25.17 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 1.35 | 4 | 50 | 10 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
35.91 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 1.35 | 4 | 50 | 15 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.85 | 15.71 | 16.48 | 18.31 | 20.6 | 10° | |
20.42 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 3 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
20.19 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 4 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
20.19 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 5 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
18.91 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
43.09 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 6 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.19 | 6.39 | 6.84 | 7.36 | 15° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 7 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 7.33 | 7.69 | 8.54 | 9.61 | 10° | |
20.48 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
26.37 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 9 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 9.42 | 9.89 | 10.98 | 12.36 | 10° | |
18.91 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 10 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
18.91 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 12 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
25.17 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 14 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
25.17 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 16 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
28.77 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 70 | 18 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 18.85 | 19.78 | 21.97 | 24.71 | 10° | |
28.77 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 70 | 20 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 20.94 | 21.98 | 24.41 | 27.46 | 10° | |
43.09 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 70 | 22 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 23.04 | 24.18 | 26.85 | Without Interference | 10° | |
31.41 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 70 | 25 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 26.18 | 27.47 | 30.51 | Without Interference | 10° | |
37.11 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 70 | 30 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 31.41 | 32.97 | 36.62 | Without Interference | 10° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 10 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 12 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 16 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
21.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
21.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
27.55 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 10 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
27.55 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 12 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
28.77 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 14 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
27.55 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 16 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
21.13 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 4 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
21.78 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
19.93 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
23.07 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 10 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
23.07 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 12 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
23.58 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 14 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
23.58 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 16 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
24.90 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 18 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 18.85 | 19.78 | 21.97 | 24.71 | 10° | |
24.90 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 20 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 20.94 | 21.98 | 24.41 | Without Interference | 10° | |
22.80 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 25 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 26.18 | 27.47 | 30.51 | Without Interference | 10° | |
22.80 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 30 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 31.41 | 32.97 | Without Interference | Without Interference | 10° | |
28.77 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 100 | 35 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 36.65 | 38.46 | Without Interference | Without Interference | 10° | |
29.96 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 100 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 41.88 | 43.96 | Without Interference | Without Interference | 10° | |
29.96 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 100 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 47.12 | 49.45 | Without Interference | Without Interference | 10° | |
22.10 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
22.10 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 10 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
21.60 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 12 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 14 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 14.66 | 15.39 | 17.09 | 19.22 | 10° | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 16 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 16.75 | 17.58 | 19.53 | 21.97 | 10° | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 70 | 18 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 18.85 | 19.78 | 21.97 | Without Interference | 10° | |
28.04 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 70 | 20 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 20.94 | 21.98 | 24.41 | Without Interference | 10° | |
32.33 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 70 | 26 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 27.22 | 28.57 | 31.73 | Without Interference | 10° | |
20.85 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 6 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
20.42 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 8 | Flat Surface / Side Surface / Nut / Inclined Cutting | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 8.38 | 8.79 | 9.76 | 10.98 | 10° |
Loading...
Spezifikationen
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
| 0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
| 1 | No Standards | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
| 0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
| 1 | ● | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
| 1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | No Standards | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
| 4 | No Standards | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | ● | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 2 | 6 | 6 | ● | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
| 3 | - | 4 | ● | ● | 10° | 3.14 | 3.30 | 3.66 | 4.12 | |||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.10 | 6.87 | |||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
| 3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
| 24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
| 0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
| 1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.30 | 3.66 | 4.12 | 1 |
| 4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
| 5 | No Standards | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
| 7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
| 1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.40 | 12.27 | |||||
| 12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference | ||||||||
| 2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
| 50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
| 25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
| 35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
| 50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
| 6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | 10° | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
| 50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Figure |
| 1.5 | 8 ~ 20 | 4 | ● | ● | 3 | 1.45 | 40 | 3 |
| 1.6 | 9 ~ 20 | 4 | ● | ● | 3.2 | 1.55 | 40 | 3 |
| 1.8 | 9 ~ 20 | 4 | ● | ● | 3.6 | 1.75 | 40 | 3 |
| 2 | 9 ~ 21 | 4 | ● | ● | 4 | 1.95 | 40 | 3 |
| 2.5 | 10 ~ 22 | 4 | ● | ● | 5 | 2.4 | 40 | 3 |
| 3 | 11 ~ 21 | 6 | ● | ● | 6 | 2.9 | 45 | 3 |
| 4 | 13 ~ 23 | 6 | ● | ● | 8 | 3.8 | 45 | 3 |
| 5 | 15 ~ 25 | 6 | ● | ● | 10 | 4.8 | 45 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
Weitere Informationen
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining. 
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
[8-25/1mmTeile]
-
Processing Applications
- Flat Surface
- Side Surface
- Nut
- Inclined Cutting
- Countersunk
-
Geometry
- Sharp Corner
- Mit Führung
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Ausführung
- LN-TSC-EM2S
- LN-TSC-PEM2S
- TSC-EM2LB
- TSC-PEM2LB
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.