Rechteckstecker（Applicable pin/contact：Stecker）

?* Informationen zur Lieferzeit und Preisen

• • Sonderpreis
  • Empfehlung

  

  D-Sub-Steckverbinder – XM2 / XM3

  OMRON

  [Features]
  ・ These are D-sub connectors that are ideal for OA equipment interfaces.
  ・ These are shielded connectors for EMI countermeasures.
  ・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
  ・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
  ・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
  ・ A compact, sturdy type with a metal shell.
  ・ Various fasteners and ground conductor fittings are available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	4.72 €
  	Besonderer Preis
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Steckverbinder in Löt- / DIP-Ausführung, Serie 57

  FUJIKURA (DDK)

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.87 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Serie PCR

  HONDA TSUSHIN KOGYO

  Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.56 €
  	Besonderer Preis
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.23 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC

  HIROSE ELECTRONIC

  A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
  
  [Features]
  ・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
  ・Thin type: mount height when used at a right angle: 4.8 mm.
  ・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
  ・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
  ・Further, there are settings available to provide a light feel even if tin plating is used.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-500 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
  
  [Features]
  · On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
  · Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
  · A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
  · In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
  · Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
  · Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.22 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder, flache Bauweise) – Serie FD*D

  HIROSE ELECTRONIC

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder Serie Han A (Schrauben-Verdrahtung)

  HARTING

  This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	13.87 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.65 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage) , Serie RD*D

  HIROSE ELECTRONIC

  These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  • They are integrated with RD-type molds and are of simple construction.
  • They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
  • The connection and the board mounting areas are metal plated.
  • Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
  • A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
  • Various accessories can be employed to allow these connectors to be used in different applications.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	5.42 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD

  HIROSE ELECTRONIC

  A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  · As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
  · The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
  · A connection press can also be used.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	12.81 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Steckverbinder Serie Han Q (Crimp-Verdrahtung)

  HARTING

  This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	16.79 €
  	Besonderer Preis
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  CK / CKS-Ausführung für kleine Schrauben und Federn, 10 A / 250 V, Einsatz

  ILME

  CK / CKS Small screw type / spring type, 10A / 250 V, Insert
  
  [Features]
  ・CK/CKS.
  ・Small screw type / spring type.
  ▪ 10A/250 V insert

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.21 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  CSH-Werkzeug nicht erforderlich, Federausführung, 16 A / 500 V, Einsatz

  ILME

  CSH, no-tool-required spring type, 16A / 500V insert
  
  [Features]
  ・CSH.
  ・No-tool-required spring type.
  ▪ 16A / 500V.
  ▪ Insert

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	19.86 €
  	Besonderer Preis
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-10,000 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
  
  [Features]
  · A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
  · By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
  · Terminals can be replaced after wires are connected, allowing ease of maintenance.
  · Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
  · Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
  · Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
  · A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.05 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6【100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	39.88 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Ausführung mit gerader Platinenmontage) , Serie SD

  HIROSE ELECTRONIC

  A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  · The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
  · Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
  · With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
  · The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	4.56 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  D-Sub-Steckverbinder (Lötverbindung) – Serie HD

  HIROSE ELECTRONIC

  A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
  
  [Features]
  · Small and lightweight connector due to metal shell.
  · The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
  · The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
  · CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	6.24 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
  
  [Features]
  · The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
  · Connector units are available in soldering, wrapping, or crimping types.
  · Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.42 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A / 50 bis 250 V, Einsatz

  ILME

  CD, general purpose crimped type, 10A / 50 - 250 V, Insert
  
  [Features]
  ・CD general purpose crimped type.
  ・10A/50 - 250V.
  ▪ Insert

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	4.82 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CP-Schraubausführung für Starkstrom, 35 A / 690 V, Einsatz

  ILME

  CP, high current screw type, 35A / 690V insert
  
  [Features]
  ・CP
  ・High current spring type.
  ▪ 35A / 690V.
  ▪ Insert

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	35.40 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  MIXO modularer Einsatz und Kontakt

  ILME

  [Features]
  · MIXO.
  · MIXO modular inserts and contacts.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
  · Supports optical fiber, coaxial, and Dsub9Pin connectors.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	5.03 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  [Ilme- Einsatz]CQ 6,5-40 A/50-400 V Crimp-Typ

  ILME

  Einfachwirkender, ultrahochdichter Dichte der CQ-Serie.
  [Eigenschaften]
  · Hohe Zuverlässigkeit und Bedienbarkeit sind wichtig für Informationsverkabelungen wie Programmierhandgeräte und Platten, auf die Benutzer häufig zugreifen.
  · Die CQ-Serie, die die bewährte rechteckige Verbinder von ilme verwendet, verbessert Benutzerfreundlichkeit und Zuverlässigkeit.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.96 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

  MISUMI

  [Merkmale] MIAutomatenstahlIs originaler, preiswerter, umweltbeständiger und wasserdichter E-Typ-Stecker. Dank der Verschraubung des Kabels kann er einfach mit einem Schlitzschraubendreher angeschlossen werden, ohne dass spezielle Werkzeuge erforderlich sind. Die Schraubverbindung ist mit einem Kontakt ausgestattet. Bitte bestätigen Sie den Typ und den Stecker oder die Buchse vor der Bestellung.

  • Mengenrabatt

  • Bestellmengen erweitert (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	12.29 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

  MISUMI

  [Merkmale] MIAutomatenstahlI's originaler, preiswerter, umweltbeständiger und wasserdichter E-Typ Steckverbinder. Es handelt sich um eine äußerst zuverlässige Crimpverbindung, die die Arbeitszeit verkürzen kann. Vollständig kompatibel mit den Produkten der wichtigsten Steckerhersteller. Bitte überprüfen Sie den Stecker oder die Buchse vor der Bestellung.

  • Mengenrabatt

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	11.75 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)

  MISUMI

  [Merkmale] MIAutomatenstahlIs origineller, preiswerter, umweltbeständiger und wasserdichter DD-Steckverbinder. Es handelt sich um eine äußerst zuverlässige Crimpverbindung, die die Arbeitszeit verkürzen kann. Ein Steckverbinder mit hoher Dichte, der in die Hauben und Sockel der Han-E-Serie integriert werden kann. Bitte überprüfen Sie den Stecker oder die Buchse vor der Bestellung.

  • Mengenrabatt

  • Bestellmengen erweitert (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	14.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Han Waterproof D-Model Connector (Crimped Connection)

  MISUMI

  D Model Connector

  • Bestellmengen erweitert (D-JIT)
  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Caulking
  • Insertion
  • Silver-Plated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	30.74 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie HDC HA

  WEIDMÜLLER

  Einsatz für Industriesteckverbinder, bestehend aus Kontaktelement und Isolierkörper.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.48 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie HDC HE

  WEIDMÜLLER

  Einsatz für Industriesteckverbinder, bestehend aus Kontaktelement und Isolierkörper.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.89 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie HDC HEE

  WEIDMÜLLER

  Einsatz für Industriesteckverbinder, bestehend aus Kontaktelement und Isolierkörper.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	16.97 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie HKP

  HONDA TSUSHIN KOGYO

  2.54 mm pitch, straight, right angle through hole type connector.
  
  [Features]
  · Based on our original design, the contacts have provide highly reliable contact.
  · A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
  · Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
  · A UL-certified product is used as an insulator.
  · Reworking wiring mistakes is also simplified using the removal tool.
  ▪ Mating with FFC, MFC, HSC, DIC series is supported

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	3.66 €
  Minimum Lieferzeit ：	12 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Serie MR

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.92 €
  	Besonderer Preis
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Gehäuse der Serie MRP

  HONDA TSUSHIN KOGYO

  Housing for the MRP series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	2.44 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Zweiteiliger Steckverbinder mit 1,27 mm Rastermaß, Serie HIF6

  HIROSE ELECTRONIC

  Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
  
  [Features]
  ・Product variation: connection methods include board-to-board model and cable pressure connection.
  ・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
  ・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
  ・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.98 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Rechteck-Schnittstellenstecker mit 1,78 mm Rastermaß, Serie QM

  HIROSE ELECTRONIC

  Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
  
  [Features]
  · Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
  · Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
  · Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
  · The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
  · The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
  · There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.73 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Boxausführung Stiftleiste mit 2,54 mm Rastermaß, Serie HIF3F

  HIROSE ELECTRONIC

  This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
  
  [Features]
  ▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
  ▪ Compatibility: pin header compatible with HIF3B series.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.57 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flacher Steckverbinder mit 2,54 mm Rastermaß, Serie HIF3FC

  HIROSE ELECTRONIC

  A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.
  
  [Features]
  ・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
  ・Low profile: pin heads are at a low height of 9.2 mm.
  ・The space between circuit boards when stacking is 12.2 mm.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.18 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.27 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Platine-in-Platine-zu-Kabel-Steckverbinder mit 2 mm Rastermaß, Serie DF4

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.04 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.11 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder Serie DF33 für Interne Stromversorgung mit 3,3-mm-Rastermaß

  HIROSE ELECTRONIC

  It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.19 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder für Flachbandkabel, kompatibel mit 3 A, Serie HIF4

  HIROSE ELECTRONIC

  Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
  
  [Features]
  · Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
  · With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
  · With an automatic extraction lever with lock release, an extraction tool is not required.
  · Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	4.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	6.64 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß) , unterstützt Serie LVDS – FX15

  HIROSE ELECTRONIC

  A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.48 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  DeviceNet-kompatibler Steckverbinder, Serie HR31

  HIROSE ELECTRONIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	5.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...