Rechteckstecker（Application：Für PCB）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Sonderpreis
- Empfehlung
D-Sub-Steckverbinder – XM2 / XM3
OMRON
[Features]
・ These are D-sub connectors that are ideal for OA equipment interfaces.
・ These are shielded connectors for EMI countermeasures.
・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
・ A compact, sturdy type with a metal shell.
・ Various fasteners and ground conductor fittings are available.
▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).- Mengenrabatt
Jetzt konfigurierenab∗ ： 4.64 € Besonderer Preis Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Serie PCR
HONDA TSUSHIN KOGYO
Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Mengenrabatt
Jetzt konfigurierenab∗ ： 7.56 € Besonderer Preis Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.23 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC
HIROSE ELECTRONIC
A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.17 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-500 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.22 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
[Features]
· Thin type.
· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
· Circuit board mounting height: 2.5 mm.
· This makes it possible to draw signals from places where there is no space between the circuit boards.
· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
· Supports automatic mounting.
· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
· Additionally, magazine packing is also available for the on-board type.
· Four-walled type prevents socket from scraping the circuit board.
· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
· Additionally, a reinforcement bracket is included to prevent solder from peeling.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.65 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage) , Serie RD*D
HIROSE ELECTRONIC
These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
[Features]
· Has a metal shell and so has a small and lightweight connector.
• They are integrated with RD-type molds and are of simple construction.
• They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
• The connection and the board mounting areas are metal plated.
• Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
• A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
• Various accessories can be employed to allow these connectors to be used in different applications.- Mengenrabatt
Jetzt konfigurierenab∗ ： 4.33 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.11 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6【100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 39.88 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Ausführung mit gerader Platinenmontage) , Serie SD
HIROSE ELECTRONIC
A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.
[Features]
· Has a metal shell and so has a small and lightweight connector.
· The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
· Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
· With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
· The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.- Mengenrabatt
Jetzt konfigurierenab∗ ： 4.33 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600
HIROSE ELECTRONIC
The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
[Features]
· The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
· Connector units are available in soldering, wrapping, or crimping types.
· Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.77 € Besonderer Preis Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie HKP
HONDA TSUSHIN KOGYO
2.54 mm pitch, straight, right angle through hole type connector.
[Features]
· Based on our original design, the contacts have provide highly reliable contact.
· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
· A UL-certified product is used as an insulator.
· Reworking wiring mistakes is also simplified using the removal tool.
▪ Mating with FFC, MFC, HSC, DIC series is supported- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.61 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Serie MR
HONDA TSUSHIN KOGYO
Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Mengenrabatt
Jetzt konfigurierenab∗ ： 5.91 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
- Sonderpreis
Zweiteiliger Steckverbinder mit 1,27 mm Rastermaß, Serie HIF6
HIROSE ELECTRONIC
Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
[Features]
・Product variation: connection methods include board-to-board model and cable pressure connection.
・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
・Compatible cables:AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.98 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rechteck-Schnittstellenstecker mit 1,78 mm Rastermaß, Serie QM
HIROSE ELECTRONIC
Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
[Features]
· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.- Mengenrabatt
Jetzt konfigurierenab∗ ： 9.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Boxausführung Stiftleiste mit 2,54 mm Rastermaß, Serie HIF3F
HIROSE ELECTRONIC
This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
[Features]
▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
▪ Compatibility: pin header compatible with HIF3B series.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.57 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Flacher Steckverbinder mit 2,54 mm Rastermaß, Serie HIF3FC
HIROSE ELECTRONIC
A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.
[Features]
・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
・Low profile: pin heads are at a low height of 9.2 mm.
・The space between circuit boards when stacking is 12.2 mm.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.18 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【100 Stk. pro Packung】
HIROSE ELECTRONIC
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
Jetzt konfigurierenab∗ ： 31.89 € Besonderer Preis Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-in-Platine-zu-Kabel-Steckverbinder mit 2 mm Rastermaß, Serie DF4
HIROSE ELECTRONIC
Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
[Features]
・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
・Small type/multi-pin: a wide range of small types with a number of pins.
・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.14 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder Serie DF33 für Interne Stromversorgung mit 3,3-mm-Rastermaß
HIROSE ELECTRONIC
It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.19 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für Flachbandkabel, kompatibel mit 3 A, Serie HIF4
HIROSE ELECTRONIC
Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
[Features]
· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
· With an automatic extraction lever with lock release, an extraction tool is not required.
· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).- Mengenrabatt
Jetzt konfigurierenab∗ ： 4.31 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Klemmen-Steckverbinder, Serie DX*LM
HIROSE ELECTRONIC
The D terminal connector is for digital broadcast devices.
[Features]
・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.
・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.
・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.
・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.
・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.
・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.40 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DeviceNet-kompatibler Steckverbinder, Serie HR31
HIROSE ELECTRONIC
These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.- Mengenrabatt
Jetzt konfigurierenab∗ ： 5.31 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Multifunktionaler Steckverbinder, zweiteilig, mit halbem Rastermaß, Serie FX2
HIROSE ELECTRONIC
Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.68 € Besonderer Preis Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
E / A-Steckverbinder mit halbem Rastermaß (Originalausführung) , Serie DX
HIROSE ELECTRONIC
I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.- Mengenrabatt
Jetzt konfigurierenab∗ ： 7.02 € Besonderer Preis Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
E / A-Steckverbinder mit halbem Rastermaß (Universalausführung) , Serie DX*M
HIROSE ELECTRONIC
This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.14 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder Serie MDF51 für hohe Spannungsfestigkeit (3000 V) , Platine mit Verriegelung im Lieferumfang enthalten
HIROSE ELECTRONIC
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.30 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Baureihe D-Sub, D02, D02-M15
JAPAN AVIATION ELECTRONICS(JAE)
Ein kleiner, leichter und äußerst zuverlässiger Steckverbinder, der alle Arten von elektronischen Geräten kleiner und dichter macht, um erweiterte Funktionen zu unterstützen.
[Eigenschaften]
Der D-Sub-Stecker entwickelt sich mit seiner Kombination aus Stift- und Buchsenstecker zum Standard.
Austauschbar mit verschiedenen Steckertypen und häufig verwendetem Zubehör.
Die Form der Muschelverbindung hat eine Polarität, die ein versehentliches verkehrtes Einstecken vollständig verhindert.
Die DO2-Serie ist ein hochdichter Montagesteckverbinder mit etwa doppelt so vielen Kontakten bei gleicher Gehäusegröße wie der D-Sub.
Das äußere Erscheinungsbild ist kurz und kompakt. Das Kontakt- und Isoliermaterial befindet sich in einer harten Stahlhülle.
Es gibt 5 Schalengrößen (E, A, B, C und D), die mit 9, 15, 25, 37 und 50 Kernen ausgestattet sind. Spezielle Arrays mit Koaxial- und Hochstromkontakten sind ebenfalls erhältlich.- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.83 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DN-Steckverbinder für kleine, flache Schnittstellen
HIROSE ELECTRONIC
This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
[Features]
· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
· The single-action lock mechanism provides excellent operability.
· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
· The dip connector includes a snap (circuit board temporary joint) bracket.
· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
· Depending on the application, cable can be extracted in either the vertical or horizontal direction.- Mengenrabatt
Jetzt konfigurierenab∗ ： 7.10 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
D-Sub-Steckverbinder XM3-L / XM2-L / XM4K / XM4L
OMRON
[Features]
・ This D-sub connector series has been renewed with lead-free compatible products.
・ The fastening screw diameter can be identified from its external appearance.
・ A solution to problems associated with combining fasteners has been found.
・ Shielded connectors for EMI countermeasures.
▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.20 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | HIROSE ELECTRONIC | OMRON |
| Artikelserie | Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-100 Stk. pro Packung】 | Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC | Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14 | D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage) , Serie RD*D | D-Sub-Steckverbinder (Ausführung mit gerader Platinenmontage) , Serie SD | Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600 | Zweiteiliger Steckverbinder mit 1,27 mm Rastermaß, Serie HIF6 | Rechteck-Schnittstellenstecker mit 1,78 mm Rastermaß, Serie QM | Boxausführung Stiftleiste mit 2,54 mm Rastermaß, Serie HIF3F | Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【100 Stk. pro Packung】 | Platine-in-Platine-zu-Kabel-Steckverbinder mit 2 mm Rastermaß, Serie DF4 | Platine-zu-Kabel-Steckverbinder Serie DF33 für Interne Stromversorgung mit 3,3-mm-Rastermaß | Steckverbinder für Flachbandkabel, kompatibel mit 3 A, Serie HIF4 | Multifunktionaler Steckverbinder, zweiteilig, mit halbem Rastermaß, Serie FX2 | E / A-Steckverbinder mit halbem Rastermaß (Originalausführung) , Serie DX | E / A-Steckverbinder mit halbem Rastermaß (Universalausführung) , Serie DX*M | |||||||||||||||
| ab∗ | 4.64 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 7.56 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 0.23 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 0.17 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 39.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.77 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 2.61 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.91 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 1.98 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 9.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 31.89 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 0.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.68 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 7.02 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 3.14 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 0.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.83 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.20 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt |
| Minimum Lieferzeit | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag |
| Connector Shape | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| A· B· C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | - | - | Sonstige | - | Sonstige | Sonstige | Dsub | Sonstige | - | Dsub | - | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | Sonstige | - | Sonstige | - | Sonstige | Sonstige | Sonstige | - | Dsub / Sonstige | Sonstige | - |
| G·H·I | - | - | - | Sonstige | - | - | - | - | - | - | - | Sonstige | - | Sonstige | - | Sonstige | Sonstige | - | - | - | - | Sonstige | - | Sonstige | - | - | - | - | - | - | - |
| J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | - | Sonstige | - | - | - | MR | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - |
| P· Q· R | - | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Buchse | Stecker | Stecker | Stecker | Stecker / Buchse | Stecker | Stecker / Buchse | Stecker | Stecker | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | Stecker | Buchse | Stecker | Stecker | Stecker | Stecker | Stecker / Buchse | Stecker | Stecker | Buchse | Stecker | Stecker / Buchse | Buchse | Buchse | Stecker | Stecker / Buchse | Buchse | Stecker / Buchse |
| Number Of Cores | 9 ～ 37 | 20 ～ 50 | 2 ～ 14 | 2 ～ 15 | 4 ～ 40 | 6 | 9 ～ 37 | 2 ～ 40 | 4 ～ 6 | 9 ～ 50 | 8 ～ 60 | 5 ～ 20 | 8 ～ 50 | 20 ～ 100 | 26 | 10 ～ 60 | 10 ～ 64 | 3 ～ 13 | 18 ～ 26 | 2 ～ 14 | 2 ～ 4 | 16 ～ 40 | 14 | 5 | 20 ～ 100 | 20 ～ 100 | 14 ～ 110 | 2 | 9 ～ 50 | 20 ～ 36 | 15 |
| Application | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB | Für PCB |
| Allowable Current(A) | 5 | 1 | 1 | 3 | 2 | 1 | 3 | 3 | 7 | 3 | 3 | 3 | 3 | 0.5 | 0.5 | 1 | 1 | 3 | 3 | 3 | 5 | 3 | 1 | 12 | 0.5 | 0.5 | 0.5 | 1 | - | 3 | 3 |
| Allowable Voltage(V) | AC 300 | 250 VAC | AC 150 | 250 VAC | - | AC 150 | AC350 | 250 VAC | AC 300 | AC350 | AC 300 | AC 300 | AC 300 | AC125 | AC100 | 200 VAC | 200 VAC | 250 VAC | 250 VAC | - | 500 | AC 300 | 250 VAC | AC 250, DC 350 | AC125 | AC125 | 250 VAC | AC / DC 3000 | - | 200 VAC | AC 300 |
| Wire connection method | - | - | Sonstige | Sonstige | Sonstige | Sonstige | - | Sonstige | Sonstige | Sonstige | Sonstige | - | - | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Crimp | Sonstige | Sonstige | - | Sonstige | Lötmittel | Sonstige | Sonstige | - | Sonstige | - | - | - |
| Connection direction | Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Winkel | Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade / Winkel | Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Winkel | Gerade |
| Protection function (environmentally resistant) | - | N/A | - | - | - | - | - | - | - | - | - | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | - | - |
| Representative Standard | - | - | - | - | UL / CSA | - | - | UL / CSA | UL / CSA | - | - | - | - | - | - | - | - | UL / CUL | - | UL / CSA | - | - | - | - | - | - | - | UL / CUL / TUV | - | - | - |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Connector Shape
- Quadratisch
- Sonstige
-
A· B· C
- Sonstige
-
D· E· F
- Dsub
- FCN
- Sonstige
-
G·H·I
- Für Hochleistungsanwendungen
- Sonstige
-
J·K·L
- Sonstige
-
M·N·O
- MR
- MIL
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- Sonstige
-
Number
- Sonstige
-
Applicable pin/contact
- Stecker
- Buchse
- Kombination aus Stecker/Buchse
- Sonstige
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 50
- AC 50
- 72
- 100
- AC100
- 120 V AC
- 125
- AC125
- 150
- AC 150
- 160
- 200 VAC
- 230
- 230/400
- 250
- 250 VAC
- AC 250, AC 125
- AC 250, DC 350
- 300
- AC300
- AC 300
- AC 300, AC 30
- AC 300, AC 250
- 320
- AC350
- 400
- AC 400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC / DC 500
- 550
- 600
- AC 600, AC 250
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC / DC 3000
- 3100
-
Wire connection method
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Connection direction
- Gerade
- Winkel
- Sonstige
-
Protection function (environmentally resistant)
-
Representative Standard
Marke
-
- MISUMI (0)
- HIROSE ELECTRONIC (25)
- HONDA TSUSHIN KOGYO (3)
- OMRON (2)
- JAPAN AVIATION ELECTRONICS(JAE) (1)
- KEL (0)
- FINDER (0)
- UNIVER (0)
- FUJITSU COMPONENT (0)
- IFM (0)
- NEUTRIK (0)
- TE CONNECTIVITY (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- AMPHENOL ICC (0)
- CONNFLY (0)
- PTR (0)
- WEIDMÜLLER (0)
- BINDER (0)
- DECA (0)
- WAGO (0)
- PROVERTHA (0)
- SOURIAU (0)
- PHOENIX CONTACT (0)
- LAPP (0)
- HARTING (0)
- EDAC (0)
- CONEC (0)
- MOLEX (0)
- TRU COMPONENTS (0)
- ECON CONNECT (0)
- ILME (0)
- HIRSCHMANN (0)
- FUJIKURA (DDK) (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Rechteckstecker
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.