Steckverbinder für Platinen（paßender Sift / Kontakt：Stecker (Stecker)）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
DIN-Steckverbinder (4 Reihen, 128 Kontakte) – XC5 (Multi-Kontakte)
OMRON
[Features]
・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.- Mengenrabatt
Jetzt konfigurierenab∗ ： 20.09 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Empfehlung
DIN-Steckverbinder (für mittleren und starken Stromfluss) – XC4
OMRON
[Features]
・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
・ It conforms to and is compatible with DIN41612.
・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
・ It can be mounted within the same rack as the XC5 series.
・ There is a wide selection of the M type of DIN connectors (mixed type) available.
▪ UL standard (File No.E103202) certified products are used as standard (except for some products).- Mengenrabatt
Jetzt konfigurierenab∗ ： 14.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für Flachbandkabel (Universalausführung) – XG4
OMRON
The core of this printed circuit board connector is compliant with MIL standards.
[Features]
· The adoption of a new high-productivity design has delivered both high reliability and low costs.
· A box type plug (XG4C type) that helps save space during installation is also available.
· A press-fit type plug (XG4E type) that can be used as a relay is also available.
· A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
· The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
· Complies with MIL standards (MIL-C-83503).
· UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.49 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C
HIROSE ELECTRONIC
Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.16 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10
HIROSE ELECTRONIC
[Features]
· Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
Some in-stock items are custom products, therefore returns and cancellations are not possible.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.30 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm is applicable.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
· Fit guiding.
· Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
· Protects against incorrect insertion into the circuit board.
· Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
· Two-part integrated product.
· This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
CF-Karten-Steckverbinder Serie MI20 / 21
HIROSE ELECTRONIC
This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.73 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11
HIROSE ELECTRONIC
[Features]
· A board-to-board connector with a ground plate.
· Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.30 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder mit halbem Rastermaß (für Platine-zu-Platine-Verbindungen) – XH2
OMRON
A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
[Features]
· Available in the same shape as the G5D in both AC/DC or DC-only types.
· Open-state leakage current between outputs is 10 μA or less.
· The voltage resistance between input/output is 2500 VAC.
· Input resistance and non-input resistance types available.
· Overvoltage absorption circuit built in.
▪ Can switch between AC full-wave rectification and half-wave rectification.- Mengenrabatt
Jetzt konfigurierenab∗ ： 5.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 4 bis 8 mm Höhe – Serie DF17
HIROSE ELECTRONIC
Connector for board to board connection with 0.5-mm pitch. Select the distance 4mm to 8mm between circuit boards by combining header and receptacle.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
Jetzt konfigurierenab∗ ： 7.59 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8
HIROSE ELECTRONIC
The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm can be applied.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
· Fit guiding.
· Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
· Prevents mis-insertion with circuit boards.
· By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
・2-Piece Unit.
・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7
HIROSE ELECTRONIC
With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
[Features]
▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
▪ Rich variation: single-array, double-array, and tin/gold plating available.
▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.50 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.56 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.13 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
FunctionMAX Platine-zu-Platine-Steckverbinder, Serie FX18
HIROSE ELECTRONIC
0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.- Mengenrabatt
Jetzt konfigurierenab∗ ： 8.91 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SL Serie 3,5
WEIDMÜLLER
Steckbarer Leiterplatten-Anschluss mit innovatiever Anschlusstechnologie für eine sichere und intuitive Handhabung.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.86 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie FFC
HONDA TSUSHIN KOGYO
Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
[Features]
• The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
• Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
• Can be used, in combination with the DIC series, as circuit-switching terminal plates.
• Can select the number of contacts required.
• Many pin lengths are available, so the user can select the appropriate length for a given.
• Select the surface required: gold, tin, or copper.
• Molds come in two colors (black and red).
• Remover pin prevents backwards insertion.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.18 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie DIC
HONDA TSUSHIN KOGYO
2.54 mm pitch connector used for circuit switching and the like.
[Features]
• Many varieties available for combination with the FCC and HKP series.
• Plating thickness is selectable according to cost requirements.
• Insulator is UL-certified.
• These connectors also come in 2, 3 and 4-series versions.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.23 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 3 bis 5 mm Höhe – Serie DF12
HIROSE ELECTRONIC
Connector for board to board connection with 0.5-mm pitch. Select the distance 3 mm to 5 mm between circuit boards by combining header and receptacle.
[Features]
· Available in a variety of board spacing dimensions.
· In addition to ultra-small 0.5-mm pitch size, 3-mm, 3.5-mm, 4-mm, and 5-mm board spacing dimensions are available.
· Supports automatic mounting.
· The connector has an absorption surface. Therefore, automatic mounting by embossed packing is possible.
· Equipped with reinforcement hardware for soldered joints.
· Products with attached reinforcement hardware to prevent solder peeling are also available for mounting to FPCs.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.61 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
[Features]
· Compatible with 5 mm to 9 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
· Long effective mating length of 1.7 mm.
· A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
· Fit guiding.
· A ±1 mm self alignment and large guiding volume makes for easy mating.
· Supports automatic mounting.
·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.50 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4
HIROSE ELECTRONIC
Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
[Features]
·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
●Dip Timer.
1. Small and Lightweight.
・Mounting space and weight are the same as the prior products (FX2 series).
・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
2. · Compatible with 5 mm to 11 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
3. Prevention of flux oozing.
· Prevents flux oozing during circuit board dip soldering.
4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
· The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.07 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5
HIROSE ELECTRONIC
A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
[Features]
· Number of pins, header-side height: 2 types.
· 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
· 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.14 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Vertikale Verbindungszapfen-Stiftleiste mit 2,5 mm Rastermaß, Serie MDF14A
HIROSE ELECTRONIC
[Features]
■ For low-cost vertical board mounting with no reseating necessary
· Post header specially designed for vertical board mounting with no reseating necessary.
· Low-cost connection provided by a combination receptacle and plug design.
■ Current capacity: 5A
· ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
■ Temporary board fixing mechanism
· Kinking keeps boards temporarily in place.
■ Pin-out specifications
· Compatible with a variety of pin-out specifications.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.33 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3
HIROSE ELECTRONIC
2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.68 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit Verriegelung, 7,92 mm Rastermaß – Serie DF22【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
[Features]
· Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
· Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.30 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Karten-Anschluss, kompatibel mit CardBus, Serie IC11S
HIROSE ELECTRONIC
A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
[Features]
· PC Card Standard: Ground plate equipped with 8 connection ground points.
·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
· Compatible with Type I, Type II, and Type III cards.
· Includes terminal for ground clip.
· Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
· Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
· Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
· High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
· Independent ejection mechanism used for easy removal of multiple high-output cards.
· Many variations: with many variations, a type that matches to a particular set can be selected.
· Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
· The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
· Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
· Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
· Also, POP-UP version 2 is approx. 12% lighter than version 1.- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.80 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Rückseitiger Steckverbinder Serie NX für E / A-Karten
HIROSE ELECTRONIC
These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
[Features]
• Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
• Shell is metal: A metal shell was used for better shielding.
• Structured so that the metal shell always touches before the contacts do.
• Full ESD shielding: A cover over the mold provides full ESD shielding.
• Locks securely: An inner lock makes locking more secure.
• Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
• Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.16 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Steckverbinder (Zwillingskontakte) – XC5 (DIN-Norm)
OMRON
[Features]
・ The number of international standard DIN connectors has been expanded substantially.
・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
・These variations can be used with a number of industrial applications.
・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
・ Low insertion force has been realized thanks to FEM analysis.
・ Can fit with the manufacturer's XC series.
▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.- Mengenrabatt
Jetzt konfigurierenab∗ ： 3.08 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder DIN-Ausführung (Zwillingskontakte) – XC5 (DIN-Ausführung)
OMRON
[Features]
・ An expanded DIN style connector series, designed with DIN in mind.
・ Fits with DIN standard connectors.
・ As it is a circuit board mounted type, it is ideal for automatic solder mounting.
・ DIN style 1 uses the same method of attachment as DIN.
・ DIN style 2 broadens the mounting dimensions further, allowing mounting with excess room.
・UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
(Except XC5).- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.88 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder DIN-Buchsen-Sequenz – XC7
OMRON
[Features]
· A sequence connector made using DIN standard dimensions.
· Daughterboard hot swapping is made possible by inserting a power line from the front and extracting from the rear.
· Can be used in the same way as with standard DIN connectors. The mounting dimensions are the same as standard B type, and C type DIN connectors. Uses a sequence terminal for all connections and has a fit length of 4 mm, helping vastly save on mounting space.
· Uses a 2-stage sequence for the socket-end 1 mm sequence terminal, and 3-stage sequence for the plug-end sequence terminal.
· The contacts use a dual-sided contact structure. Furthermore, the gold/palladium plating of the contact points increases durability and allows for 5,000 insertions and extractions.
· The sequence terminal position can be chosen.- Mengenrabatt
Jetzt konfigurierenab∗ ： 14.97 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
IC-Buchse – XR2
OMRON
[Features]
・ Highly reliable such as being able to cope with sudden power outages etc.
・Ideal for high speed data processing circuits.
· The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
・ The opening for inserting the contact is large, so insertion is easy.
・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
· Has excellent resistance to rises in flux.
・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
▪ UL standard (File No.E103202).
・ Certified products are used as standard.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.31 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
USB-Anschluss, XM7
OMRON
A compact interface connector that complies with USB standards
[Features]
· Mini-USB connector.
· 5000 installation/removal cycles.
· L-shaped DIP terminals and SMT terminals available.
· USB connector.
· The A type socket is for PCs and USB hubs, etc. The B type socket is for printers, scanners, mice and other PC peripherals.- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.26 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Originalstecker – XG8
OMRON
[Features]
・ This is a general purpose original plug that conforms to a broad range of applications.
・ It can be widely used as a plug for a variety of socket fitting.
・ Examples of conforming socket connectors (manufacturer: …, Connector for XG4M flat cable/XG5 loose wire insulation displacement connector.
· Compatible with through hole diameter ⌀0.8.
・ For the 2-column type of L-shape terminal plug, through the utilization of a block type of base, workability is improved during soldering, a lock lever that has been simplified further is used and simple locking is possible (except for XG8V, XG8W Straight).
・ Separation cut is possible (except XG8WL type).
▪ UL standard (File No.E103202).
・ Certified products are used as standard (only XG8A and XG8B).- Mengenrabatt
Jetzt konfigurierenab∗ ： 1.23 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder mit halbem Rastermaß (für Platine-zu-Platine-Verbindungen) – XH3
OMRON
[Features]
・ A space saving type that saves space in the screw mounting section.
・ Handles stacking heights of 12 mm to 20 mm.
・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
・ Has a mating length of 3.1 mm, helping improve space during mounting.
・ The design of the press fit section helps maintain a stable contact force.
・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
▪ UL standard certified product (File No.E103202).
・Cannot be mated with XH2/XH4 half pitch connectors.- Mengenrabatt
Jetzt konfigurierenab∗ ： 4.19 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kurzschluss-Steckverbinder – XJ8 / XG8S / XG8T
OMRON
[Features]
· A low-profile, economical connector that is used for circuit switching.
· Provides an above circuit board height of 5.8 mm (XJ8 type) or 6.8 mm (XG8S/T), and a low profile.
· These connectors can also be used both vertically and horizontally in 2.54-mm grid high-density mountings.
· Available in a lineup of one to three rows.
· Compatible with through hole diameters of ⌀0.8.
· An easy-to-insert, difficult-to-remove structure.
· A 2-point contact structure with high contact reliability.
· The thin plug housing (XJ8 type) is made using PPS resin, which has excellent heat-resistant characteristics.
· UL Standard (File NO E103202).
· Certified products are used as standard (XJ8 type).- Mengenrabatt
Jetzt konfigurierenab∗ ： 0.22 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Steckverbinder für interne Stromversorgung, Baureihe DF60 (45 A-Support, 10,16 mm Raster)【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.- Mengenrabatt
Jetzt konfigurierenab∗ ： 2.94 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | OMRON | OMRON | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | OMRON | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | WEIDMÜLLER | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | OMRON | HIROSE ELECTRONIC |
| Artikelserie | DIN-Steckverbinder (4 Reihen, 128 Kontakte) – XC5 (Multi-Kontakte) | DIN-Steckverbinder (für mittleren und starken Stromfluss) – XC4 | Steckverbinder für Flachbandkabel (Universalausführung) – XG4 | EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C | Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10 | Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C | Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2 | Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11 | Steckverbinder mit halbem Rastermaß (für Platine-zu-Platine-Verbindungen) – XH2 | Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 4 bis 8 mm Höhe – Serie DF17 | Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8 | Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7 | Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1 | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12 | Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 3 bis 5 mm Höhe – Serie DF12 | Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6 | Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4 | Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5 | Vertikale Verbindungszapfen-Stiftleiste mit 2,5 mm Rastermaß, Serie MDF14A | Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3 | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10 | Steckverbinder DIN-Ausführung (Zwillingskontakte) – XC5 (DIN-Ausführung) | Steckverbinder mit halbem Rastermaß (für Platine-zu-Platine-Verbindungen) – XH3 | |||||||||||||||
| ab∗ | 20.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.49 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.79 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.59 € *Stückpreis Standardkonfiguration | 1.87 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.61 € *Stückpreis Standardkonfiguration | 1.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.68 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.16 € *Stückpreis Standardkonfiguration | 3.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.94 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Steckerform | Quadratisch | Quadratisch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Quadratisch | - | - | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | - |
| A· B· C | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | DIN/Mini-DIN | DIN/Mini-DIN | - | Sonstige | Sonstige | Sonstige | - | - | Sonstige | - | Sonstige | Sonstige | - | - | - | Sonstige | - | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | - | - | Sonstige | - | - | - | DIN/Mini-DIN | - | - | - | - | - | - | - | Sonstige |
| G·H·I | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | USB | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | XH | - | - |
| Anzahl | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) |
| Anzahl der Adern | 128 | 15 ～ 48 | 10 ～ 64 x 2 | 2 | 80 ～ 168 | 60 ～ 140 | 1 ～ 20 | 50 | 80 ～ 140 | 20 ～ 80 | 70 | 60 ～ 140 | 5 ～ 24 | 6 ～ 64 | 64 ～ 96 | 40 ～ 100 | 2 ～ 6 | 2 ～ 144 | 2 ～ 24 | 20 ～ 60 | 20 ～ 100 | 20 ～ 68 | 20 ～ 80 | 5 ～ 10 | 4 ～ 44 | 2 ～ 4 | 68 | 20 ～ 128 | 32 | 20 ～ 100 | 16 ～ 100 | 96 | 8 ～ 64 | 4 ～ 5 | 2 ～ 100 | 20 ～ 120 | 2 ～ 24 | 1 ～ 4 |
| Anwendung | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten | Kabelanschluss / Für Leiterplatten / Plattenmontagen | Für Leiterplatten | Platine-zu-Platine | Kabelanschluss | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Für Leiterplatten | Kabelanschluss / Für Leiterplatten |
| Zulässiger Strom(A) | 2 | 6 ～ 15 | 1 ～ 3 | 5 | 0.3 | 0.4 | 3 | 0.5 | 0.3 | 0.5 | 0.3 | 0.4 | 3 | 3 | 2 | 0.5 | 10 | 3 | 1 | 0.3 | 0.5 | 0.5 | 0.5 | 5 | 1 | 22 ～ 25 | 0.5 | 2 | 0.5 | 2 | 2 | 2 | 1 | 1 | 3 | 0.5 | 2 | 38 ～ 45 |
| Zulässige Spannung(V) | AC 300 | AC 380 ～ AC500 | 250 VAC ～ AC 300 | AC / DC 500 | AC 50 | AC100 | 200 VAC | AC125 | AC 50 | AC125 | AC 50 | AC100 | 250 VAC | 200 VAC | AC 300 | AC100 | 300 | 300 | AC125 | AC 50 | AC100 | AC125 | AC100 | 250 VAC | 200 VAC | AC / DC 1000 | - | AC 300 | AC125 | AC 300 | AC 300 | AC 300 | AC 300 | AC 30 | AC 300 | AC125 | AC 300 | AC / DC 1000 |
| Verdrahtungsverfahren | Lötmittel | Lötmittel | Pressschweißen | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Pressschweißen | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | - | - | - | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Crimp / Sonstige | Sonstige | Sonstige | Pressschweißen | Lötmittel | - | - | Lötmittel | Lötmittel | - | Lötmittel | Lötmittel | Crimp / Sonstige |
| Anschlussrichtung | Winkel | Winkel | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Winkel | Gerade | Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade | Winkel | Winkel | Gerade | Gerade / Winkel | Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade / Winkel | Winkel | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel |
| Schutzfunktion (umweltbeständig) | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | N/A | - | - | - | - | - | - | - | - | - | - | N/A | - | - | N/A | N/A | N/A | N/A | N/A | - |
| Repräsentativer Standard | - | UL | - | - | - | - | - | - | - | - | - | - | - | - | - | - | UL / CSA | - | - | - | - | - | - | - | - | UL / CUL / TUV | - | - | - | UL / CSA | - | - | UL | - | UL | UL | UL | UL / CUL / TUV |
Loading...
Filtern nach:
-
Steckerform
- Rund
- Quadratisch
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- USB
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Marke
-
- HIROSE ELECTRONIC (23)
- OMRON (12)
- HONDA TSUSHIN KOGYO (2)
- WEIDMÜLLER (1)
- FUJIKURA (DDK) (0)
- HARTING (0)
- MOLEX (0)
- ERNI (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.