Scheiben（work material：Gusseisen Seite 2）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
„GP Disc Wheel“ (senkrechte Ausführung) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· For use with ordinary metal. Gap between polishing cloths is wide, preventing clogging even when rust or paint is peeled off. Since the polishing cloth comes into contact with the material to be polished at right angles, the material will not be damaged.
· It has heat dissipation property, causing little or no distortion or burning of the material to be polished due to heat.
[Applications]
· Pre-plating polishing, metal surface polishing, rust removal, and deburring.
· Polishing wood and plastic.
· Tool used: disc grinder.- Mengenrabatt
Jetzt konfigurierenab∗ ： 41.85 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„GP Disc Wheel Soft“ (diagonale Ausführung) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Has diagonally attached blades and gently contacts workpieces.
· It has heat dissipation property, causing little or no distortion and burning of the material to be polished due to heat.
[Applications]
· Pre-plating polishing, metal surface polishing, rust removal, and deburring.
· Polishing woodwork and plastic.
· Tool used: disc grinder.- Mengenrabatt
Jetzt konfigurierenab∗ ： 39.43 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„GP Disk Wheel“ (direkt einschraubbar / senkrechte Ausführung) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· For use with ordinary metal. Gap between polishing cloths is wide, preventing clogging. As the substrate is smaller than the outer diameter of the polishing cloth, the lower surface and sides can be polished at the same time.
· It has heat dissipation property, causing little or no distortion or burning of the material to be polished due to heat.
· It can be installed in a single action (screw type).
[Applications]
· Pre-plating polishing, metal surface polishing, rust removal, and deburring. Polishing woodwork and plastic.
· Tool used: disc grinder.- Mengenrabatt
Jetzt konfigurierenab∗ ： 40.38 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
„Fabric Disc“ (für Schwingschleifer / Vliesschleifmittel) 【2 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Made from non-woven nylon fibers and alundum abrasive grains, thereby ensuring gentle grinding work, suitable for finished products.
· Attached to the pad with Velcro tape for use.
[Applications]
· For removing light rust from metallic products and for glazing.
· Smoothing out wood products.
· Tool used: dual-action sander (Velcro type).- Mengenrabatt
Jetzt konfigurierenab∗ ： 4.33 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Schleifpapier【10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· A disc polishing agent with superior heat-resistance, using a vulcanized fiber circuit board.
· Uses silicon carbide abrasive grain.
· Attach to a disc grinder to conduct efficient rust removal, deburring, releasing coating film, grinding of stone materials etc. (Pneumatic/electric dual use)
· Use at a peripheral speed of 4,300 m/min.
[Applications]
· For removing welding beads: #14 - #24.
· Removal of rust on ship or car bodies: #24 - #60.
· Metal deburring: #40 - #80.
· For polishing stone materials (medium finish): #80 - #120.
· Rough removal of paint: #80 - #120.- Mengenrabatt
Jetzt konfigurierenab∗ ： 17.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
ASTRA Klettscheibe, Loch, braun【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Dust suction type Double-Action Sander paper that uses alundum abrasive particles. (some hole diameters may not match.)
· Velcro tape disc with a hole corresponding to the dust suction type dual action sander. Suction of the dust is conducted through 6 holes.
· Pattern-coated abrasive cloth is coated with abrasive grain in an even pattern to provide synergistic beating, grinding, and polishing.
· The pattern coating results in stronger polishing power with less clogging compared to conventional products. Furthermore, the ventilation creates a cooling effect, reducing the likelihood of burns.
[Applications]
· For polishing putty and surfacer on metal coatings. (Surface polishing)
· Fabric and coating polish for woodwork, furniture, musical instruments, etc.
· Sanding and surface smoothing of baked coatings.
· Tool used: dust-suction type dual action sander. (Velcro Type)- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.50 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
ASTRA Klettscheibe, Weiß【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Pattern-coated abrasive cloth is coated with abrasive grain in an even pattern to provide synergistic beating, grinding, and polishing.
· The pattern coating results in stronger polishing power with less clogging compared to conventional products. Furthermore, the ventilation creates a cooling effect, reducing the likelihood of burns.
· Dust suction type Double-Action Sander paper that uses alundum abrasive particles.
[Applications]
· For polishing putty and surfacer on metal coatings.
· Fabric and coating polish for woodwork, furniture, musical instruments, etc.
· Sanding and surface smoothing of baked coatings.
· Tool used: non-dust suction type dual action sander. (Velcro Type)- Mengenrabatt
Jetzt konfigurierenab∗ ： 6.45 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Klettscheibe Ø50【100 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· The count can be exchanged with a single touch.
· Sharp cutting edge.
· Abrasion marks are unlikely to appear.
· Minimal clogging and long life.
· Granule degree #120-#1000 is water resistant and can be combined with water.
[Applications]
· Automotive buffing repair process.
· Various types of buffing in woodworking and furniture making.
· Buffing of building paint and in interior construction.
· Paint buffing in all types of vehicles.
· Black baked paint buffing.- Mengenrabatt
Jetzt konfigurierenab∗ ： 23.11 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schwamm-Schleifscheibe α【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· The product is a blue sponge grindstone made of polyvinyl alcohol (PVA) that features superior elasticity and delivers beautiful finished surfaces with moderate elasticity.
· The GC (green carborundum) and WA (white alundum) abrasive grain is used with resins that have been more carefully selected than conventional products.
· Stable polished surfaces can be derived with improved durability.
[Applications]
· Removal of rust, deburring, welding surface finishing for various metals, grinding and polishing of plated coatings, scale removal, finishing of tanks, etc. (Steel/Stainless Steel/Aluminum/Zinc/Brass/Copper)- Mengenrabatt
Jetzt konfigurierenab∗ ： 116.23 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Soft Power Disc“ (Polyurethanharz, zum Vorschlichten) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Even used as a single action sander, it has the beautiful finish of a double action sander and significantly reduces sheet metal work.
· The cushion body has special foam material and is evenly in contact with the polishing surface, allowing for feather touch grinding.
· The constant wearing away and regeneration of abrasive material and special foam material means that it won't get clogged.
· Granule degree #60 (Finished surfaces #180 to #240 equivalent).
· For medium polishing of urethane resin.
[Applications]
· Scratch removal of general metals, descaling, and finish polishing of stainless steel.
· Effective for paint removal.- Mengenrabatt
Jetzt konfigurierenab∗ ： 144.34 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Poly Disc α“ (zum Polieren) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Blue wool felt disc impregnated with non-chrome type grease and oil abrasive can achieve mirror glossy finish, as is.
[Applications]
· Optimal for polishing stainless steel and general metals.
· Glazing and mirror surface finishing.- Mengenrabatt
Jetzt konfigurierenab∗ ： 94.36 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Poly Disc“ (zum Polieren) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Wool felt disc impregnated with non-chrome type grease and oil abrasive can achieve mirror glossy finish, as is.
· Eliminates the need for adding polishing agent.
· Soft high-quality product with additional cushion function.
[Applications]
· Optimal for polishing stainless steel and general metals.
· Glazing and mirror surface finishing.- Mengenrabatt
Jetzt konfigurierenab∗ ： 179.51 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
„Sisal Disc“ (zum Vorpolieren) 【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Enables beautiful polishing with a sharp cut.
· Used for intermediate polishing for steel, stainless steel, aluminum, etc. with oil and fat abrasive (white rod).
· Sisal (hemp) and cotton are combined.
[Applications]
· Steel, stainless steel, aluminum, and other medium polishing and sub polishing.
· Tools Used: disc grinder and air grinder.- Mengenrabatt
Jetzt konfigurierenab∗ ： 80.23 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 55.48 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 104.31 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 66.43 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Scheibe PL PS【100 Stk. pro Packung】
SANKYO RIKAGAKU
Klebeverbindungstyp.
Anwendungen sind wie folgt.
(1) Polieren von Leichtmetall- und Harzprodukten
(2) Polieren von Lackieroberflächen
(3) Polieren von Holzarbeiten und Möbeln
(4) Autoreparatur
(5) Polieren von verschiedenen Fahrzeugen- Mengenrabatt
Jetzt konfigurierenab∗ ： 66.43 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Schleifpapier „Sticon P Soft“【100-200 Stk. pro Packung】
KOVAX
Viscous abrasive is somewhat open coated to help prevent clogging and give continued polishing power.- Mengenrabatt
Jetzt konfigurierenab∗ ： 73.73 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Schleifpapier „Sticon Hard“【100-200 Stk. pro Packung】
KOVAX
Close-coated abrasive on tough paper is suitable for stringent polishing work.- Mengenrabatt
Jetzt konfigurierenab∗ ： 73.73 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schleifpapier GP Top® 100 Blatt【100 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· All-round type that features an abundant grain size variation to handle rough finishing polishing.
· There is hardly any strain on the workpieces due to heat or burning due to the air cooling effect.
[Applications]
· Metal polishing, removing welding beads, polishing automobiles, hulls and tanks, various types of deburring, and polishing other stainless steel, steel, and nonferrous metals.- Mengenrabatt
Jetzt konfigurierenab∗ ： 394.32 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Filzscheibe verjüngt【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Thanks to its umbrella-like shape, the tip of the disc remains in constant contact with the workpiece, making a beautiful finish possible.
· Has high flexibility and adapts well to workpieces.
· Mounting hole diameter is 15 mm, usable with both electric and pneumatic grinders.
[Applications]
· Grease abrasive (blue bar etc.) is applied to iron and stainless steel for polishing and mirror finish.
· Tool used: 100 mm disc grinder (electric/pneumatic dual use)- Mengenrabatt
Jetzt konfigurierenab∗ ： 114.83 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 49.49 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Type |
| work material |
| Outer diameter Dimensions(mm) |
| Inner Diameter Dimension(mm) |
| Thickness(mm) |
| Particle Size(#) |
| abrasive grain |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | SANKYO RIKAGAKU | SANKYO RIKAGAKU | SANKYO RIKAGAKU | SANKYO RIKAGAKU | KOVAX | KOVAX | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | ICHIGUCHI |
| Artikelserie | „GP Disc Wheel“ (senkrechte Ausführung) 【5 Stk. pro Packung】 | „GP Disc Wheel Soft“ (diagonale Ausführung) 【5 Stk. pro Packung】 | „GP Disk Wheel“ (direkt einschraubbar / senkrechte Ausführung) 【5 Stk. pro Packung】 | „Fabric Disc“ (für Schwingschleifer / Vliesschleifmittel) 【2 Stk. pro Packung】 | „Soft Power Disc“ (Polyurethanharz, zum Vorschlichten) 【5 Stk. pro Packung】 | Schleifpapier-Scheibe HN mit hoher Teilung【50 Stk. pro Packung】 | ||||||||||||||||
| ab∗ | 41.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 39.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 40.38 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.33 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 17.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.45 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 23.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 116.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 144.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 94.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 179.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 80.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 55.48 € *Stückpreis Standardkonfiguration Mengenrabatt | 104.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 66.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 66.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 73.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 73.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 394.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 114.83 € *Stückpreis Standardkonfiguration Mengenrabatt | 49.49 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 10 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Type | Vielblattscheibe | Vielblattscheibe | Vielblattscheibe | Nicht gewebte Stoffscheibe | Schleifpapier | Schleifpapier | Schleifpapier | Schleifpapier | Kautschuk/harte Polyurethan-Scheibe | Kautschuk/harte Polyurethan-Scheibe | Filzscheibe | Filzscheibe | Baumwolle: Hanfscheibe | Schleifpapier | Schleifpapier | Schleifpapier | Schleifpapier | Schleifpapier | Schleifpapier | Vielblattscheibe | Filzscheibe | Vielblattscheibe |
| work material | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] | Gusseisen[◎] | Gusseisen[◎] | Gusseisen[◎] | Gusseisen[◎] | Gusseisen[◎] | Gusseisen[◎] | Gusseisen[○] | Gusseisen[○] | Gusseisen[○] |
| Outer diameter Dimensions(mm) | 100 | 100 | 100 | 125 | 100 ～ 180 | 125 | 125 | 50 | 100 | 100 | 100 | 100 | 100 | 125 | 125 | 125 | 125 | 125 | 125 | 100 | 95 | 100 ～ 180 |
| Inner Diameter Dimension(mm) | 16 | 16 | - | - | 15.9 ～ 22.2 | - | - | - | 16 | 16 | 16 | 16 | M10(P1.5) ～ 16 | - | - | - | - | - | - | - | 15 | 15 ～ 22 |
| Thickness(mm) | - | - | - | - | - | - | - | - | 8 | 8 | 10 | 10 | 15 | - | - | - | - | - | - | - | 10 | - |
| Particle Size(#) | 40 ～ 400 | 40 ～ 400 | 40 ～ 400 | 320 ～ 600 | 14 ～ 120 | 60 ～ 600 | 60 ～ 600 | 60 ～ 1000 | 46 ～ 800 | 60 | - | - | - | 80 ～ 120 | 150 ～ 2000 | 40 ～ 800 | 40 ～ 600 | 40 ～ 600 | 60 ～ 400 | 60 ～ 120 | - | 36 |
| abrasive grain | - | - | - | - | - | - | - | - | - | - | - | - | - | Schleifkörper A | Schleifkörper A | Schleifkörper A | Schleifkörper A | Schleifkörper A | Schleifkörper A | Schleifkörper A | - | - |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Type
- Vielblattscheibe
- Diamantscheibe
- Netzscheibe
- Nicht gewebte Stoffscheibe
- Kautschuk/harte Polyurethan-Scheibe
- Baumwolle: Hanfscheibe
- Filzscheibe
- Schleifpapier
- Befestigungen/Sonstige
-
work material
- Stahl allgemein
- Edelstahl
- Legierter Stahl
- Gusseisen
- Kupferwerkstoff
- Aluminium
- Steinwerkstoff
- Glaswerkstoff
- Kunststoff
-
Outer diameter Dimensions(mm)
-
Inner Diameter Dimension(mm)
-
Thickness(mm)
-
Particle Size(#)
- 14
- 16
- 20
- 24
- 30
- 36
- 36 Equivalent
- 40
- 46
- 46, 80, 120, 180, 240, 360
- 50
- 60
- 80
- 80 Equivalent
- 100
- GC#100
- 120
- 120 Equivalent
- #120
- 150
- 180
- 180 Equivalent
- 220
- #220
- 240
- 240 Equivalent
- #240
- 280
- 320
- 320 Equivalent
- #320
- 360
- 400
- 400 Equivalent
- #400
- 500
- 600
- 600 Equivalent
- 800
- 800 Equivalent
- 1000
- 1000 Equivalent
- 1500
- 2000
-
abrasive grain
- Schleifkörper A
- Schleifkörper WA
- Schleifkörper C
- Schleifkörper Z
- Schleifmittel GZ
- Schleifkörper AA
- Schleifkörper SZ
- E Schleifmittel
- Keramik-Schleifkörper
- Siliziumcarbid-Schleifkörper
- Nicht verfügbar
- Schleifkörper TC
Marke
-
- TRUSCO NAKAYAMA (29)
- YANASE (10)
- ICHIGUCHI (9)
- SANKYO RIKAGAKU (6)
- RIKEN CORUNDUM (4)
- KOVAX (3)
- NORITAKE COATED ABRASIVE (2)
- NIPPON RESIBON (2)
- KURE GRINDING WHEEL (1)
- RESITON (1)
- LOBTEX (0)
- NEWREGISTON (0)
- DREMEL (0)
- PFERD (0)
- NIHON SEIMITSU KIKAI KOSAKU (0)
- UHT (0)
- BELL STAR ABRASIVE MFG (0)
- NAKANISHI (0)
- TACT (0)
- MURAKO (0)
- MINITOR (0)
- NIHON KENSHI (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Scheiben
-
- DIA/CBN-Schleifscheiben
- Flachschleifscheiben
- Schleifstein-Abrichtwerkzeuge
- Offset-/Flex-Schleifgeräte
- Scheiben
- Polierblätter
- Polierriemen
- Schleifsteine mit Schaft
- DIA/CBN-Stäbe
- Ultrahart-Stäbe
- Räder mit Schaft
- Bürsten mit Schaft
- Topfbürsten
- Handbürsten
- Stift-Schleifsteine
- Feilen
- Abgratwerkzeuge
- Schleifmittel für Schleifgeräte
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.