Drehmomentschlüssel（Head Replaceable：N/A）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
Drehmomentschlüssel
TOHNICHI MFG
[Merkmale]
· Wenn das eingestellte Drehmoment erreicht ist, wird der Knebel aktiviert und ein Tonsignal informiert den Benutzer, dass der Anzug abgeschlossen ist.
· Der Ratschenkopf hat 24 Zähne und eine Amplitude von 15° für außergewöhnliches Anziehen auf engstem Raum.
· Drehmoment kann einfach durch Graduierung geändert werden .
[Anwendungen]
· Für anspruchsvolle Baustellen wie Felder und solche, die Ölen und Chemikalien ausgesetzt sind.- Mengenrabatt
Jetzt konfigurierenab∗ ： 142.44 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kanon Drehmomentschlüssel, Einzelfunktion, Schlüssel-Ausführung, N-SPK-Ausführung
NAKAMURA MFG
[Features]
· Click. Safety work with a beep indicating the completion of tightening. Wrench type suitable for assembly-line work.
· A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
· Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
· Can be used effectively in narrow spaces, such as the gaps in machinery.
· While it activates only when fastened in arrow direction, it can be used for left screws by flipping over.
· The accuracy is guaranteed up to ±3%.
· H types with grips are also available.Jetzt konfigurierenMinimum Lieferzeit ： 8 Arbeitstage -
Kanon Drehmomentschlüssel mit Voreinstellung, Permanentmarkierung, N-MQLK-Ausführung
NAKAMURA MFG
[Features]
· Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
· Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
· Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
· The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
· The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
· For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
· Red ink is included as an accessory.
· Its simple structure makes maintenance easy
· The accuracy is guaranteed up to ±3%.- Mengenrabatt
Jetzt konfigurierenab∗ ： 534.00 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel mit Ziffernblatt (mit Nadel)
TOHNICHI MFG
[Features]
· Worker fatigue decreases due to having fewer irregular shapes compared to plates.
· Dial scale can be rotated, so the indicator can be set to the configured torque and completed with "0".
· Analog version is convenient for reading the maximum value.
[Applications]
· For inspection and tightening.- Mengenrabatt
Jetzt konfigurierenab∗ ： 263.73 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 759.23 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Speichereinstellung)
MAEDAKINNZOKU
Dedicated torque wrench for tightening bolts and nuts.
[Features]
· A digital type with easy-to-see numerical display that drastically reduces errors in torque setting.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
· Torque can be set by inserting a hex L-shape wrench into a configuration thread component in the rear of the wrench.
[Applications]
· Ideal for assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.
· Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
· Ideal for various torque management tightening work.- Mengenrabatt
Jetzt konfigurierenab∗ ： 228.25 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Ratschenschlüssel Digital (digitale Ausführung)
MAEDAKINNZOKU
Easy-to-use ratchet type digital torque wrench.
[Features]
· Digital torque display allows anyone to manage torque with ease without relying on their intuition.
· When the set torque is reached, it will be announced by an LED light, buzzer sound and LCD.
· Comes with a calibration certificate.
· The measured torque value can be transferred to a PC.
· Data storage: Up to 250 entries.
[Applications]
· Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.- Mengenrabatt
Jetzt konfigurierenab∗ ： 406.43 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 231.84 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 152.36 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmomentschlüssel, Einzelfunktion, Ratschen-Ausführung, N-QSPK-Ausführung
NAKAMURA MFG
[Features]
· Set the torque value constant. The ratchet mechanism with square drive enhances work efficiency.
· A ratchet type that can be quickly tightened at a constant torque, making it suitable for repetitive work.
· The operation when releasing the torque value is the same as for the N-SPK type.
The accuracy is guaranteed up to ±3%.Jetzt konfigurierenab∗ ： 92.24 € Minimum Lieferzeit ： 13 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmomentschlüssel, flache Ausführung, N-FK-Ausführung
NAKAMURA MFG
[Features]
· Ideal for general tightening and inspection. A popular type fan-shaped plate scale.
· A simple construction that lasts long due to little abrasion.
· Robust and easy to handle.- Mengenrabatt
Jetzt konfigurierenab∗ ： 107.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung (Direkteinstellungs- / Halte-Ausführung)
MAEDAKINNZOKU
Tip socket is a holding type that prevents bits from falling out, as a torque wrench that dramatically decreases mistakes.
[Features]
· Equipped with a hold mechanism that prevents the socket from falling off and provides excellent operability.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
[Applications]
· For assembly, maintenance and inspection at locations in high places where torque control is required.
· Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
· Ideal for various torque management tightening work.- Mengenrabatt
Jetzt konfigurierenab∗ ： 263.50 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Universal-Ausführung (Ausführung mit Direkteinstellung)
MAEDAKINNZOKU
Specialized monkey-type clamping torque wrench which does not damage the corners of bolts or nuts.
[Features]
· The lower jaw of the monkey wrench head part is better secured, and has a backlash-less worm function.
· Digital-type torque setting for easy identification of displayed value.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or sensation to the hand.
· Can be adjusted to any required sizes, metric or inch, or to square or irregular shapes of nuts and bolts.
[Applications]
· For piping of air conditioners, etc. and torque tightening for automobiles and motorcycles.
· For optical fiber connector/exchanger mounting in communication facilities, as well as for anchor bolts on evacuation equipment in disaster prevention facilities, etc.
· Wide type ideal for tightening non-ferrous/plastic nuts, etc. at low torque.- Mengenrabatt
Jetzt konfigurierenab∗ ： 349.52 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Direkteinstellung)
MAEDAKINNZOKU
Dedicated torque wrench for tightening bolts and nuts.
[Features]
· Digital-type torque setting for easy identification of displayed value.
· In tightening work, when it reaches the set torque value, there will be a "clicking" sound or a sensation to the hand.
· Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
· Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
[Applications]
· For assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.- Mengenrabatt
Jetzt konfigurierenab∗ ： 195.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Handy Digitorque
MAEDAKINNZOKU
Digital torque measuring device.
[Features]
· Can be mounted between manual handles and sockets for use.
· When the set torque is reached, it will be announced by a buzzer sound, red LED light and LCD.
· Comes with a calibration certificate.
· Can be switched between two measurement modes (peak mode / track mode). Supports both clockwise and counterclockwise rotation.
· Equipped with a function to prevent overtorque by notifying the user with a sound of the buzzer (intermittent) when target torque is almost achieved.
· The buzzer can be set to start in a range between 50 and 95% of target torque.
[Applications]
· Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.- Mengenrabatt
Jetzt konfigurierenab∗ ： 115.16 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Super-Drehmomentschlüssel
SUPER TOOL
[Features]
· The flare nut for use with new refrigerants is tightened at a suitable torque value. The tightening torque setting supports new refrigerants.
· Tightening is complete at the point when a "click" sound is made at the set torque- Mengenrabatt
Jetzt konfigurierenab∗ ： 86.59 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Super-Drehmomentschlüssel, Satz
SUPER TOOL
The flare nut for use with new refrigerants is tightened at a suitable torque value.Jetzt konfigurierenab∗ ： 120.44 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 63.06 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselförmiger, einseitiger Drehmomentschlüssel
MAEDAKINNZOKU
Dedicated torque wrench for tightening flare nuts.
[Features]
· Standard tightening torque is set in advance for the new refrigerant's flare pipe coupling and flare nut.
* The torque value setting cannot be changed.
· When it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
[Applications]
· For tightening flare tube fittings and flare nuts on room air-conditioners, cooling machines, etc.- Mengenrabatt
Jetzt konfigurierenab∗ ： 85.95 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Jetzt konfigurieren
ab∗ ： 131.00 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Isolierter Drehmoment-Schlüssel, Einzelfunktion, Ratschen-Ausführung, N-QSPK-CE-Ausführung
NAKAMURA MFG
[Features]
· A special dual-layer design for the insulating material prevents accidents with electric shock.
· A special dual-layer coating of insulating material protects the operator from electric shock.
· Since the upper and lower layers of the dual-layer coating of insulating material have been color-coded, it is easy to see at a glance the extent of damage to the coating.
· The withstand voltage is within 1,000 VAC.
· Ideal for servicing, maintenance, and inspection of electric cars.
· The insulated coating socket is also a custom order product.
· The accuracy is guaranteed up to ±3%.- Mengenrabatt
Jetzt konfigurierenab∗ ： 227.96 € Minimum Lieferzeit ： 45 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmomentschlüssel mit Voreinstellung, Ausführung mit Sperrmechanismus, N-KQLK-Ausführung
NAKAMURA MFG
[Features]
· The torque adjusting ring is secured using a dedicated tool. Torque value cannot be changed while working.
· The torque value cannot be changed without a dedicated tool.
· There are no torque value fluctuations during tightening work.
· A ratchet type that enhances work efficiency and is suitable for repetitive work.
· The accuracy is guaranteed up to ±3%.- Mengenrabatt
Jetzt konfigurierenab∗ ： 248.78 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmomentschlüssel, Einzelfunktion, Ringschlüssel, N - RSPK-Ausführung
NAKAMURA MFG
[Features]
· A-OK even in narrow places where a wrench cannot be inserted. Ring type with no mistakes in torque.
· Ideal for fastening in narrow places where a wrench cannot be inserted.
· A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
· Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
· The accuracy is guaranteed up to ±3%.
· H types with grips are also available.- Mengenrabatt
Jetzt konfigurierenab∗ ： 92.24 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Offener Schraubenschlüssel mit Hakenschlüssel, N-QLK
NAKAMURA MFG
[Features]
· Preset type ideal for fastening nuts and round rods with a key groove.
· Preset type torque wrench N-QLK with open wrench and hook wrench attached.
· Ideal for fastening nuts and round rods with a key groove.
· Also useful for setting the tooling to be used for machine tools and attaching blades.
· Used for piping work and maintenance in thermal and nuclear power stations throughout Japan.
· The accuracy is guaranteed up to ±3%.- Mengenrabatt
Jetzt konfigurierenab∗ ： 251.74 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Kanon Drehmoment-Schlüssel, flache Ausführung, N-FK-Ausführung, mit Anzeige
NAKAMURA MFG
[Features]
· Ideal for general tightening and inspection. A popular type fan-shaped plate scale.
· A simple construction that lasts long due to little abrasion.
· Robust and easy to handle.- Mengenrabatt
Jetzt konfigurierenab∗ ： 222.84 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
![[Kanon] Drehmomentschlüssel mit Messuhr](http://de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N-TOK.jpg?$product_view_b$)
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Product Type |
| Torque adjustment range(N·m) |
| Two-plane dimensions(mm) |
| Insertion Angle(mm) |
| Minimum graduation(N·m) |
| Head Replaceable |
| Replaceable Head Type |
| Overall Length(mm) |
| Load direction |
| Torque Precision(±%) |
| Head width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TOHNICHI MFG | NAKAMURA MFG | NAKAMURA MFG | TOHNICHI MFG | TOHNICHI MFG | MAEDAKINNZOKU | MAEDAKINNZOKU | NAKAMURA MFG | NIPPEI KIKI | NAKAMURA MFG | NAKAMURA MFG | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | SUPER TOOL | SUPER TOOL | SROAD | MAEDAKINNZOKU | SIGNET | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG |
| Artikelserie | Kanon Drehmomentschlüssel, Einzelfunktion, Schlüssel-Ausführung, N-SPK-Ausführung | Kanon Drehmomentschlüssel mit Voreinstellung, Permanentmarkierung, N-MQLK-Ausführung | Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Speichereinstellung) | Kanon Drehmomentschlüssel, Einzelfunktion, Ratschen-Ausführung, N-QSPK-Ausführung | Kanon Drehmomentschlüssel, flache Ausführung, N-FK-Ausführung | Drehmomentschlüssel, Ausführung mit Voreinstellung (Direkteinstellungs- / Halte-Ausführung) | Drehmomentschlüssel, Universal-Ausführung (Ausführung mit Direkteinstellung) | Drehmomentschlüssel, Ausführung mit Voreinstellung (Ausführung mit Direkteinstellung) | Kanon Isolierter Drehmoment-Schlüssel, Einzelfunktion, Ratschen-Ausführung, N-QSPK-CE-Ausführung | Kanon Drehmomentschlüssel mit Voreinstellung, Ausführung mit Sperrmechanismus, N-KQLK-Ausführung | Kanon Drehmomentschlüssel, Einzelfunktion, Ringschlüssel, N - RSPK-Ausführung | Kanon Drehmoment-Schlüssel, flache Ausführung, N-FK-Ausführung, mit Anzeige | |||||||||||||
| ab∗ | 142.44 € *Stückpreis Standardkonfiguration Mengenrabatt | - | 534.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 263.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 759.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 228.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 406.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 231.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 152.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 92.24 € *Stückpreis Standardkonfiguration | 107.38 € *Stückpreis Standardkonfiguration Mengenrabatt | 263.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 349.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 195.38 € *Stückpreis Standardkonfiguration Mengenrabatt | 115.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 86.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 120.44 € *Stückpreis Standardkonfiguration | 63.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 85.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 131.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 227.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 248.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 92.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 251.74 € *Stückpreis Standardkonfiguration Mengenrabatt | 222.84 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | Versand am selben Tag | 8 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 13 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 45 Arbeitstage | 7 Arbeitstage | 8 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage |
| Product Type | Vorgegebene Form | Einzelfunktionsausführung | Affenausführung | Messuhrausführung | Vorgegebene Form | Digitale Ausführung | Digitale Ausführung | Messuhrausführung | Vorgegebene Form | Einzelfunktionsausführung | Messuhrausführung | Digitale Ausführung | Digitale Ausführung | Digitale Ausführung | Digitale Ausführung | Einzelfunktionsausführung | Einzelfunktionsausführung | Vorgegebene Form | Einzelfunktionsausführung | Einzelfunktionsausführung | Affenausführung | Affenausführung | Einzelfunktionsausführung | Vorgegebene Form | Messuhrausführung |
| Torque adjustment range(N·m) | 0.4~2 ～ 40.0～280.0 | 0.5～3 ～ 45～220 | 10–50 ～ 40～140 | 0.2 to 1.5 ～ 100.0～1000.0 | 100.0～550.0 ～ 500.0～2100.0 | 10–50 ～ 40–200 | 6～30 ～ 40–200 | 1–12 | 6～30 ～ 70～350 | 2 to 6 | 0.1～0.70 ～ 70～420 | 4–20 ～ 60～300 | 3 to 15 ～ 50–150 | 1–6 ～ 60～300 | 10～135 ～ 20–200 | 16 ～ 38 | 16 ～ 38 | 5~25 ～ 42～210 | - | 10~100 ～ 100～550 | 7～25 ～ 20~100 | 10–50 ～ 40–200 | 0.5~3.5 ～ 14～73 | 10–50 | 10–90 ～ 70～420 |
| Two-plane dimensions(mm) | - | - | - | - | - | - | - | - | - | - | - | - | 10～27 ～ 27～48 | - | - | 17 ～ 22 | 17 ～ 22 | - | - | - | - | - | - | - | - |
| Insertion Angle(mm) | 6.35 ～ 19.05 | - | - | 6.35 ～ 25.4 | 19.05 ～ 25.4 | 9.5 ～ 12.7 | 6.35 ～ 12.7 | - | 9.5 ～ 12.7 | - | - | 9.5 ～ 19 | - | 6.35 ～ 19 | 9.5 ～ 12.7 | - | - | 6.35 ～ 12.7 | - | - | - | - | - | - | - |
| Minimum graduation(N·m) | 0.02 ～ 2 | - | 0.5 ～ 1 | 0.02 ～ 10 | 5 ～ 10 | 0.5 ～ 2 | 0.3 ～ 5 | 0.2 | 0.2 ～ 1 | - | 0.02 ～ 20 | 0.2 ～ 2 | 0.2 ～ 2 | 0.1 ～ 2 | - | - | - | 0.5 ～ 2 | - | - | - | 0.5 ～ 2 | - | - | 2 ～ 10 |
| Head Replaceable | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Replaceable Head Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 160 ～ 695 | 152 ～ 597 | 254 ～ 392 | 205 ～ 1490 | 1189 ～ 1895 | 291 ～ 505 | 221 ～ 520 | 260 | 235 ～ 555 | 174 | 132 ～ 853 | 253 ～ 716 | 289 ～ 570 | 222 ～ 716 | 75 | 220 ～ 230 | 220 ～ 230 | 275 ～ 465 | 220 ～ 292 | - | 232 ～ 352 | 254 ～ 478 | 175 ～ 353 | 282 ～ 330 | 388 ～ 853 |
| Load direction | Rechts | - | - | Links/rechts | Rechts | Rechts | Links/rechts | - | Links/rechts | - | - | Rechts | Links/rechts | Rechts | Links/rechts | - | - | - | Links/rechts | - | - | - | - | - | - |
| Torque Precision(±%) | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | Right 4 | - | 3 | 3 | 4 ～ 7 | 3 | 3 | - | - | - | 4 | - | 3 | 3 | 3 | 3 | 3 |
| Head width(mm) | - | - | - | - | - | 36 ～ 45.2 | 22.5 ～ 41 | - | - | - | - | 24 ～ 45.2 | 49.3 ～ 83.3 | 24 ～ 45.2 | - | - | - | - | - | - | - | - | - | - | - |
![[Kanon] Drehmomentschlüssel mit Messuhr](http://de.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N-TOK.jpg?$product_view_c$)
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Product Type
- Digitale Ausführung
- Messuhrausführung
- Vorgegebene Form
- Affenausführung
- Einzelfunktionsausführung
- Austauschkopf
- Sonstige
- Drehmomentschlüsselprüfer
-
Torque adjustment range(N·m)
- 0.0005～0.0045
- 0.001～0.005
- 0.001～0.009
- 0.002～0.015
- 0.003～0.03
- 0.003～0.8
- 0.004～0.03
- 0.005~0.06
- 0.006～0.06
- 0.01～0.12
- 0.01～0.15
- 0.02～0.15
- 0.02～0.24
- 0.03～0.24
- 0.03～8
- 0.04～0.36
- 0.05～0.6
- 0.06～0.6
- 0.08～0.4
- 0.1~0.7
- 0.1～0.70
- 0.1～0.9
- 0.1~1.5
- 0.2 to 1.5
- 0.3～3.0
- 0.4~2
- 0.5～3
- 0.5~3.5
- 0.6～6
- 1–3
- 1–5
- 1–6
- 1–12
- 1.5～8
- 2 to 6
- 2 to 9
- 2–10
- 2～12
- 2.5-25
- 3~13
- 3 to 15
- 3～23
- 3～60
- 3.5～19
- 4 to 12
- 4–20
- 4~21
- 4 - 40
- 4～40
- 5~25
- 5.0～25.0
- 5~45
- 5～46
- 5.0～50.0
- 5–60
- 6
- 6～30
- 7～23
- 7～25
- 8～38
- 9～42
- 10
- 10-50
- 10～45
- 10–50
- 10.0～50.0
- 10–70
- 10–90
- 10～92
- 10~100
- 10.0～100.0
- 10～135
- 12
- 12～60
- 12.5
- 13～67
- 14
- 14～73
- 15–60
- 16
- 17～85
- 20-100
- 20~90
- 20~100
- 20.0～100.0
- 20~110
- 20~120
- 20～130
- 20.0 to 200.0
- 20–200
- 21～105
- 24～120
- 25-130
- 25～115
- 27～135
- 28～210
- 30~140
- 30.0～140.0
- 30～160
- 30～180
- 30~190
- 38
- 40-200
- 40～140
- 40~180
- 40 - 200
- 40–200
- 40.0～200.0
- 40～210
- 40.0～280.0
- 40～280
- 40.0～420.0
- 42～120
- 42～210
- 45～220
- 50–150
- 50～280
- 50.0～560.0
- 60-300
- 60～280
- 60～300
- 60.0～420.0
- 60～440
- 68～340
- 70～350
- 70～420
- 70.0～700.0
- 80～400
- 80～560
- 100~500
- 100.0～550.0
- 100～550
- 100～560
- 100~700
- 100～850
- 100.0～850.0
- 100~1000
- 100.0～1000.0
- 150.0～750.0
- 170～850
- 200.0～1000.0
- 200～1400
- 200～1500
- 200～2100
- 300.0～1400.0
- 400～2000
- 500.0～2100.0
-
Two-plane dimensions(mm)
-
Insertion Angle(mm)
-
Minimum graduation(N·m)
-
Head Replaceable
- Verfügbar
- N/A
-
Replaceable Head Type
- Offener Kopf
- Ringkopf
- Ratschenkopf
- Ratschenkopfbuchse
- Sechskant
- Einstellbarer Kopf
- Sonstige
-
Overall Length(mm)
- 19.0
- 20.5
- 23.4
- 25
- 35
- 40
- 41
- 42
- 43
- 44
- 45
- 50
- 52
- 53
- 54
- 55
- 55.8
- 56
- 57
- 58
- 59
- 61
- 62
- 63
- 64
- 65
- 66
- 68
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 82
- 84
- 91
- 94
- 95
- 96
- 98
- 99
- 100
- 101
- 102
- 105
- 106
- 108
- 115
- 120
- 125
- 132
- 134
- 135
- 140
- 145
- 152
- 160
- 161
- 170
- 173
- 173.5
- 174
- 175
- 186
- 190
- 193
- 195
- 197
- 198
- 200
- 203
- 205
- 208
- 213
- 216
- 218
- 220
- 221
- 222
- 225
- 228
- 229
- 230
- 232
- 235
- 237
- 238
- 248
- 250
- 252
- 253
- 254
- 256
- 260
- 264
- 268
- 271
- 273
- 275
- 278
- 282
- 283
- 285
- 286
- 289
- 290
- 291
- 292
- 295
- 298
- 303
- 308
- 310
- 319
- 320
- 325
- 330
- 331
- 335
- 338
- 342
- 343
- 346
- 348
- 352
- 353
- 355
- 360
- 365
- 369
- 370
- 372
- 380
- 386
- 387
- 388
- 389
- 390
- 392
- 397
- 400
- 403
- 404
- 405
- 410
- 420
- 421
- 435
- 438
- 440
- 441
- 442
- 443
- 445
- 449
- 450
- 455
- 457
- 465
- 467
- 478
- 480
- 483
- 487
- 489
- 490
- 500
- 505
- 510
- 520
- 526
- 543
- 555
- 565
- 570
- 585
- 587
- 595
- 597
- 607
- 640
- 648
- 655
- 695
- 716
- 825
- 853
- 890
- 908
- 940
- 945
- 995
- 1051
- 1086
- 1100
- 1175
- 1178
- 1189
- 1206
- 1220
- 1260
- 1267
- 1315
- 1342
- 1360
- 1387
- 1388
- 1410
- 1417
- 1490
- 1504
- 1515
- 1538
- 1640
- 1700
- 1740
- 1787
- 1895
- 2140
-
Load direction
- Rechts
- Links/rechts
-
Torque Precision(±%)
-
Head width(mm)
Marke
-
- NAKAMURA MFG (10)
- MAEDAKINNZOKU (7)
- TOHNICHI MFG (3)
- SUPER TOOL (2)
- NIPPEI KIKI (1)
- SIGNET (1)
- SROAD (1)
- BESTTOOL (0)
- IFM (0)
- NIDEC-SHIMPO (0)
- SK 11 (0)
- CIMCO (0)
- NORELEM (0)
- AMF (0)
- E VALUE (0)
- KNIPEX (0)
- WIHA (0)
- FACOM (0)
- BERNSTEIN AG (0)
- STAHLWILLE (0)
- KTC(KYOTO TOOL) (0)
- GEDORE (0)
- WERA (0)
- HAZET (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Drehmomentschlüssel
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Dosensenker
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Drehmomentschlüssel
- Drehmomentschrauber
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Schneidwerkzeuge
- Isolierwerkzeuge
- Werkzeuge für Elektroanlagen
- Hämmer
- Meißel
- Gravierwerkzeuge/Stanzen
- Werkzeug-Sets/Werkzeugkästen
- Cutter, Rollschneider, Skalpellmesser
- Stemmeisen / Hebel
- Auszieher
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
- Stemmwerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.