TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

HIROSE ELECTRONIC Rechteckstecker（Representative Standard：CSA）

Daten, die angezeigt werden sollen: 30; 45; 60

Sortieren nach:

Lieferzeit	Alle Produkte Versand am selben Tag 3 Tage oder weniger 4 Tage oder weniger 5 Tage oder weniger 6 Tage oder weniger 7 Tage oder weniger 8 Tage oder weniger 9 Tage oder weniger 10 Tage oder weniger 11 Tage oder weniger

?* Informationen zur Lieferzeit und Preisen

Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11

Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-500 Stk. pro Packung】

HIROSE ELECTRONIC

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.

[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Mengenrabatt

ab^∗ ：	0.16 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)

Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-10,000 Stk. pro Packung】

HIROSE ELECTRONIC

Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.

[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Mengenrabatt

ab^∗ ：	0.02 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6

Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6【1-100 Stk. pro Packung】

HIROSE ELECTRONIC

Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.

[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Mengenrabatt

ab^∗ ：	0.19 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)

Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【1-100 Stk. pro Packung】

HIROSE ELECTRONIC

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

Mengenrabatt

ab^∗ ：	0.11 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Rack- und Platten-Steckverbinder Serie QR / P1

HIROSE ELECTRONIC

Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.

[Features]
· The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
· The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
· Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
· Guide pins are metallic to withstand coupling impact.
· Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Mengenrabatt

ab^∗ ：	3.75 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Rack- und Platten-Steckverbinder, Serie QR / P4

HIROSE ELECTRONIC

Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.

[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.

Mengenrabatt

ab^∗ ：	3.13 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Rack- und Platten-Steckverbinder, Serie QR / P6

HIROSE ELECTRONIC

Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.

[Features]
· The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.

Mengenrabatt

ab^∗ ：	2.86 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Rack- und Platten-Steckverbinder, Serie QR / P8

HIROSE ELECTRONIC

• Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.

[Features]
• Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
• By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
• In addition, terminals for signals are positioned with a 2-mm pitch.
• The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
• Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
· The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
• This product has obtained UL, CSA, and TUV certifications.

Mengenrabatt

ab^∗ ：	1.70 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Rack- und Platten-Steckverbinder, Serie QR / P

HIROSE ELECTRONIC

Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.

[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

Mengenrabatt

ab^∗ ：	3.66 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration


Warenzeichen
Artikelserie
ab^∗
Minimum Lieferzeit ：
Connector Shape
A· B· C
D· E· F
G·H·I
J·K·L
M·N·O
P· Q· R
S· T· U
Number
Applicable pin/contact
Number Of Cores
Application
Allowable Current(A)
Allowable Voltage(V)
Wire connection method
Connection direction
Protection function (environmentally resistant)
Representative Standard


Warenzeichen	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC	HIROSE ELECTRONIC
Artikelserie	Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-500 Stk. pro Packung】	Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-10,000 Stk. pro Packung】	Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6【1-100 Stk. pro Packung】	Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【1-100 Stk. pro Packung】	Rack- und Platten-Steckverbinder Serie QR / P1	Rack- und Platten-Steckverbinder, Serie QR / P4	Rack- und Platten-Steckverbinder, Serie QR / P6	Rack- und Platten-Steckverbinder, Serie QR / P8	Rack- und Platten-Steckverbinder, Serie QR / P
ab^∗	0.16 € *Stückpreis Standardkonfiguration Mengenrabatt	0.02 € *Stückpreis Standardkonfiguration Mengenrabatt	0.19 € *Stückpreis Standardkonfiguration Mengenrabatt	0.11 € *Stückpreis Standardkonfiguration Mengenrabatt	3.75 € *Stückpreis Standardkonfiguration Mengenrabatt	3.13 € *Stückpreis Standardkonfiguration Mengenrabatt	2.86 € *Stückpreis Standardkonfiguration Mengenrabatt	1.70 € *Stückpreis Standardkonfiguration Mengenrabatt	3.66 € *Stückpreis Standardkonfiguration Mengenrabatt
Minimum Lieferzeit ：	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage
Connector Shape	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch
A· B· C	-	-	-	-	-	-	-	-	-
D· E· F	Sonstige	Sonstige	-	Sonstige	-	-	-	-	-
G·H·I	-	-	-	-	-	-	-	-	-
J·K·L	-	-	-	-	-	-	-	-	-
M·N·O	-	-	Sonstige	-	-	-	-	-	-
P· Q· R	-	-	-	-	Sonstige	Sonstige	Sonstige	Sonstige	Sonstige
S· T· U	-	-	-	-	-	-	-	-	-
Number	-	-	-	-	-	-	-	-	-
Applicable pin/contact	Stecker / Buchse	Stecker / Buchse	Stecker / Buchse	Stecker / Buchse	Stecker / Buchse	Stecker	Buchse	Stecker / Buchse	Stecker / Buchse
Number Of Cores	4 ～ 40	2 ～ 40	4 ～ 10	2 ～ 15	12 ～ 32	16	24	8 ～ 12	8 ～ 24
Application	Kabelanschluss / Für PCB / Plattenmontage	Kabelanschluss / Für PCB / Plattenmontage	Kabelanschluss / Für PCB	Kabelanschluss / Für PCB / Plattenmontage	Plattenmontage	Plattenmontage	Plattenmontage	Plattenmontage	Plattenmontage
Allowable Current(A)	0.5 ～ 2	0.5 ～ 3	5 ～ 7	3	10	3	10	3	10
Allowable Voltage(V)	AC100 ～ 250 VAC	250 VAC	AC 300	250 VAC	AC 250, AC 125	AC 300, AC 250	120 V AC	AC 300, AC 30	AC 600, AC 250
Wire connection method	Crimp / Pressschweißen / Sonstige	Crimp / Pressschweißen / Sonstige	Crimp / Sonstige	Crimp / Sonstige	Crimp	-	-	Crimp	Crimp
Connection direction	Gerade / Winkel	Gerade / Winkel	Gerade / Winkel	Gerade / Winkel	Gerade	Gerade	Gerade	Gerade	Gerade
Protection function (environmentally resistant)	-	-	-	-	-	-	-	-	-
Representative Standard	CSA	CSA	CSA	CSA	CSA	CSA	CSA	CSA	CSA

Filtern nach:

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Connector Shape
- Quadratisch
- Sonstige
Zurücksetzen

A· B· C
- Sonstige
Zurücksetzen

D· E· F
- Dsub
- FCN
- Sonstige
Zurücksetzen

G·H·I
- Für Hochleistungsanwendungen
- Sonstige
Zurücksetzen

J·K·L
- Sonstige
Zurücksetzen

M·N·O
- MR
- MIL
- Sonstige
Zurücksetzen

P· Q· R
- Sonstige
Zurücksetzen

S· T· U
- Sonstige
Zurücksetzen

Number
- Sonstige
Zurücksetzen

Applicable pin/contact
- Stecker
- Buchse
- Kombination aus Stecker/Buchse
- Sonstige
Zurücksetzen

Number Of Cores
1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

24

25

26

27

28

30

31

32

34

35

36

37

38

40

41

42

45

46

48

50

51

52

56

60

64

68

72

75

80

92

96

100

108

110

120
Zurücksetzen

Application
- Kabelanschluss
- Für PCB
- Platine-zu-Platine
- Plattenmontage
- Sonstige
Zurücksetzen

Allowable Current(A)
0.10

0.5

1

1.5

1.75

2

max. 2

3

3.5

4

5

6

6/5 max.

6.5 max.

Max: 6.5

max: 6.5

7

7,5

max. 7.5

8

10

12

13

15

16

17.5

20

23

24

25

32

33

35

40

40/10

41

42

65

70

76

80

100

200

AC/DC
Zurücksetzen

Allowable Voltage(V)
5

DC 12

12 VDC - 230 VAC

17.5

24

25

50

AC 50

72

100

AC100

120 V AC

125

AC125

150

AC 150

160

200 VAC

230

230/400

250

250 VAC

AC 250, AC 125

AC 250, DC 350

300

AC300

AC 300

AC 300, AC 30

AC 300, AC 250

320

AC350

400

AC 400

400/400 V (Leistungs-/Steuerungsbereich)

400/690

400/690 V (Leiter-Erde/Leiter/Leiter)

400/690 V(Leiter-Erde/Leiter-Leiter)

500

AC500

AC / DC 500

550

600

AC 600, AC 250

630

690

690/160 V (Leistungs-/Steuerungsbereich)

830

830/400 V (Leistungs-/Steuerungsbereich)

1000

1550

AC / DC 3000

3100
Zurücksetzen

Wire connection method
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
Zurücksetzen

Connection direction
- Gerade
- Winkel
- Sonstige
Zurücksetzen

Protection function (environmentally resistant)
- Verfügbar
- N/A
Zurücksetzen

Representative Standard
- PSE
- CE
- UL
- CUL
- TUV
- CCC
- CSA
Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

- MISUMI (1)
- Kostengünstige Artikel ()
- WEIDMÜLLER (19)
- ILME (14)
- HIROSE ELECTRONIC (9)
- HARTING (2)
- MOLEX (2)
- KEL (0)
- FINDER (0)
- UNIVER (0)
- FUJITSU COMPONENT (0)
- IFM (0)
- NEUTRIK (0)
- TE CONNECTIVITY (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- AMPHENOL ICC (0)
- CONNFLY (0)
- PTR (0)
- BINDER (0)
- DECA (0)
- WAGO (0)
- PROVERTHA (0)
- SOURIAU (0)
- PHOENIX CONTACT (0)
- LAPP (0)
- EDAC (0)
- CONEC (0)
- TRU COMPONENTS (0)
- HONDA TSUSHIN KOGYO (0)
- JAPAN AVIATION ELECTRONICS(JAE) (0)
- ECON CONNECT (0)
- HIRSCHMANN (0)
- FUJIKURA (DDK) (0)
- ASSMANN WSW (0)
- OMRON (0)
- VOGT VERBINDUNGSTECHNIK (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
Zurücksetzen