HIROSE ELECTRONIC Steckverbinder für Platinen（Anwendung：Für Leiterplatten）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C
HIROSE ELECTRONIC
Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.- Mengenrabatt
ab∗ ： 0.16 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SIM-Karten-Stecker, Serie ID1
HIROSE ELECTRONIC
This is a SIM card connector. With the slide-lock method, card holder opening and closing is easy.- Mengenrabatt
ab∗ ： 1.94 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.- Mengenrabatt
ab∗ ： 0.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
CF-Karten-Steckverbinder Serie MI20 / 21
HIROSE ELECTRONIC
This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.- Mengenrabatt
ab∗ ： 3.73 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.- Mengenrabatt
ab∗ ： 0.56 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3
HIROSE ELECTRONIC
2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.68 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit Verriegelung, 7,92 mm Rastermaß – Serie DF22【100 Stk. pro Packung】
HIROSE ELECTRONIC
[Features]
· Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
· Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 41.32 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Karten-Anschluss, kompatibel mit CardBus, Serie IC11S
HIROSE ELECTRONIC
A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
[Features]
· PC Card Standard: Ground plate equipped with 8 connection ground points.
·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
· Compatible with Type I, Type II, and Type III cards.
· Includes terminal for ground clip.
· Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
· Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
· Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
· High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
· Independent ejection mechanism used for easy removal of multiple high-output cards.
· Many variations: with many variations, a type that matches to a particular set can be selected.
· Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
· The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
· Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
· Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
· Also, POP-UP version 2 is approx. 12% lighter than version 1.- Mengenrabatt
ab∗ ： 6.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Rückseitiger Steckverbinder Serie NX für E / A-Karten
HIROSE ELECTRONIC
These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
[Features]
• Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
• Shell is metal: A metal shell was used for better shielding.
• Structured so that the metal shell always touches before the contacts do.
• Full ESD shielding: A cover over the mold provides full ESD shielding.
• Locks securely: An inner lock makes locking more secure.
• Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
• Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.- Mengenrabatt
ab∗ ： 5.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
MicroSD-Karten-Anschluss – Serie DM3
HIROSE ELECTRONIC
A socket connector for use with the microSD Card TM. Available in a wide array of variations.
Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 1.60 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard
HIROSE ELECTRONIC
This PC card connector is compliant with the PC Card Standard.
[Features]
· Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
· Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
· Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
· Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
· Card connectors that support automatic mounting are available.
· Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.ab∗ ： 3.33 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9
HIROSE ELECTRONIC
This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
[Features]
・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
・This allows for every type of card signal to be accelerated.
・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.- Mengenrabatt
ab∗ ： 5.65 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Steckverbinder für interne Stromversorgung, Baureihe DF60 (45 A-Support, 10,16 mm Raster)
HIROSE ELECTRONIC
Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.- Mengenrabatt
ab∗ ： 9.09 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Artikelserie | EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C | Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2 | Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1 | Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3 | PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard | Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9 | |||||||
| ab∗ | 0.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.68 € *Stückpreis Standardkonfiguration Mengenrabatt | 41.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.01 € *Stückpreis Standardkonfiguration | 1.60 € *Stückpreis Standardkonfiguration | 3.33 € *Stückpreis Standardkonfiguration | 5.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.09 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 11 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 10 Arbeitstage |
| Steckerform | - | - | - | - | - | - | - | - | - | - | - | - | - |
| A· B· C | - | - | Sonstige | - | Sonstige | Sonstige | - | - | - | - | - | - | - |
| D· E· F | Sonstige | - | - | - | - | - | Sonstige | - | - | Sonstige | - | - | Sonstige |
| G·H·I | - | Sonstige | - | - | - | - | - | Sonstige | - | - | Sonstige | Sonstige | - |
| M·N·O | - | - | - | Sonstige | - | - | - | - | Sonstige | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Anzahl | - | - | - | - | - | - | - | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Stecker (Stecker) |
| Anzahl der Adern | 2 | 6 | 1 ～ 20 | 50 | 6 ～ 64 | 4 ～ 44 | 2 ～ 3 | 68 | 32 | 8 | 68 | 68 | 1 ～ 2 |
| Anwendung | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten |
| Zulässiger Strom(A) | 5 | 1 | 3 | 0.5 | 3 | 1 | 25 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 40 ～ 45 |
| Zulässige Spannung(V) | AC / DC 500 | AC100 | 200 VAC | AC125 | 200 VAC | 200 VAC | AC / DC 1000 | - | AC125 | AC125 | AC125 | AC125 | AC / DC 1000 |
| Verdrahtungsverfahren | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige |
| Anschlussrichtung | Gerade | Winkel | Gerade / Winkel | Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Winkel | Winkel | Winkel | Winkel | Winkel | Gerade / Winkel |
| Schutzfunktion (umweltbeständig) | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Repräsentativer Standard | - | - | - | - | - | - | UL / CUL / TUV | - | - | - | - | - | UL / CUL / TUV |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Steckerform
- Rund
- Quadratisch
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- USB
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- HIROSE ELECTRONIC (13)
- OMRON (13)
- MOLEX (5)
- HONDA TSUSHIN KOGYO (2)
- WEIDMÜLLER (2)
- FUJIKURA (DDK) (1)
- HARTING (0)
- ERNI (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.