HOZAN Lötprodukte (Optionen/Andere)

?* Informationen zur Lieferzeit und Preisen

• 

  Dritte Hand

  HOZAN

  [Features]
  · Solder aids for use with PCBs. A set of six tools, including a scraper and brush, etc.

  • Mengenrabatt

  ab∗ ：	4.67 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötzinn-Absorber (Ersatzteile HS-801) 【1-10 Stk. pro Packung】

  HOZAN

  Replacement part for the HS-801 clog-removing solder absorber. Increases negative pressure while melting the solder before then instantly blotting, even enabling whole chip parts to be suctioned. Equipped with the standard nozzle (HS-812).

  • Mengenrabatt

  ab∗ ：	3.98 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Heißluft-Entlötgerät (Ersatzteile HS-559)

  HOZAN

  Replacement parts for the HS-559, a small, hot air, non-contact type desoldering device for SMDs. Also suitable for use with lead free solder. Set Temperature: 220 to 445°C. Nozzle not included.

  • Mengenrabatt

  ab∗ ：	21.29 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötpinzette (Ersatzteil HS-401)

  HOZAN

  The replacement part for the HS-401 which enables the user to grab chip parts on high density substrates. Suitable for use with lead free solder. ■ 3-pin plug specification.■ Power Cord: 1 m
  
  [Features]
  · SMD high density substrates have been becoming ever denser and the spacing between components ever smaller, increasing the demand for tools which can be used with pin point accuracy.
  · Hot tweezers solve this very problem.
  · An SMD repair tool which is able to grab chip parts.
  · A safety-focused and energy-saving design that only heats when the remote switch is set to ON.
  · Allows for sensitive tweezer work with either the left or right hand.
  · Small and lightweight with a weight of just 42 g (not including cord).
  · A safety focused design with automatic recovery function, even when the load side shorts.
  · Uses a set power control system that can supply heat in one second increments.
  · Features sufficient power for use with lead free solder.
  · Complies with FCC standards for radio frequency interference regulations.
  · Has an input voltage of 100V to 240V.
  · Uses a switching system that is compatible with voltages for all countries around the world. Simply insert the power supply plug into the outlet to use.
  · 400°C in approximately 3 seconds (at MAX).
  · Quick start-up for immediate use.
  · Unlike copper bits which corrode due to heat and flux, these boast excellent abrasion resistance and will not react to acids and alkali.
  · Solder will not adhere to the heater, making it ideal for reworking.

  • Mengenrabatt

  ab∗ ：	55.90 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Elektrisches Abisolierwerkzeug (Ersatzteile P-90)

  HOZAN

  For instant stripping and cutting off of coatings. A replacement part for the P-90 series.
  
  [Features]
  · Can cleanly strip insulation and outer jackets from VCTFK cables (elliptical and oval cords) (P-90-F).
  · Comes with a strip gauge.
  · The strip length can be set from 4 to 25 mm.

  • Mengenrabatt

  ab∗ ：	6.44 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötkolben (Ersatzteile H-130)

  HOZAN

  A replacement part for the 15W H-130 soldering iron. Rated Voltage: AC100V, Maximum Temperature: 400°C, Heater: H-115, Bit: H-131
  
  [Features]
  · Features wedge lines that have been cut on three surfaces. Fits perfectly to fingers, helping reduce worker fatigue.
  · Designed especially for long working hours such as on assembly lines, etc.
  · Efficiently draws heat from small heaters.
  · A cap type bit.
  · Slim ø10 mm size.

  • Mengenrabatt

  ab∗ ：	16.18 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötkolben (Ersatzteile HS-11)

  HOZAN

  A replacement part for the 11W soldering iron. Rated Voltage: AC100V, Maximum Temperature: 400°C (with HS-201 Equipped), Standard Bit: HS-201 (ø1.0 mm), Heater: HS-113
  
  [Features]
  · A corrosion-resistant bit with highly heat conductive pure copper that has been given a special iron coating.
  · A cap type that is applied onto the heater and ensures that only the required amount of heat from the heater is applied to the bit.
  · Features a built-in stainless steel internal pipe that prevents seizing due to oxidation.
  · Has a specially shaped handle which gives a natural grip sensation.
  · The distance between the grip point and the tip of the bit is only 64 mm
  · Enables pencil touch work.
  · Enables easy and reliable ultra-precision soldering.

  • Mengenrabatt

  ab∗ ：	14.25 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötkolben mit Temperaturanpassung (Ersatzteile HS-51)

  HOZAN

  Replacement part for the HS-51 precision and cost effective soldering iron. Suitable for use with lead free solder. Rated Voltage: AC100V, Power Consumption: 80W (Bit sold separately.)
  
  [Features]
  · The bit, heater, and sensor are all integrated, helping it deal with temperature fluctuations at the tip and enabling the user to control the temperature.
  · Lowering the temperature of the tip lessens working stress.
  · The soldering iron has been newly designed so as to provide better heat insulating properties. This helps protect the worker from uncomfortable levels of heat, even during extended use.
  · Enables quick and tool-less bit replacement.
  · Equipped with a settings lock function, essential to managing work temperatures.
  · Uses a pin code system so no cards or keys are required.
  · Features a sleep function (sleep sensitivity / time setting method: 0 to 20°C / 0 to 999 minutes). Features an automatic power off function for those times when the power is left on (0 to 999 minutes time setting type).
  · The station can be stacked.
  · Does not take up much space on work desks or tables, even when using multiple stands.

  • Mengenrabatt

  ab∗ ：	22.07 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötkolben mit korrosionsbeständigem Bit (Ersatzteil H-829 bis 869)

  HOZAN

  Soldering Iron with Corrosion-Resistant Bit H-829/839/849/820/830/840/860/869 Replacement Part

  • Mengenrabatt

  ab∗ ：	6.54 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lötkolben mit Kappe (Ersatzteile H-250 / H-250-230)

  HOZAN

  [Features]
  · 30W H-250 soldering iron with cap.
  · H-250-230 replacement part.

  • Mengenrabatt

  ab∗ ：	7.39 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Modulares Stecker-Crimpwerkzeug (Ersatzklinge P-710)

  HOZAN

  Crimping Tool for 4/6 Core Modular Plug (for Indoor Telephone Wiring), Replacement Blade Set for P-710

  • Mengenrabatt

  ab∗ ：	11.58 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Lötkolbenhalter

  HOZAN

  Compatible Models: H-5/6/16, Quantity: 1

  • Mengenrabatt

  ab∗ ：	21.13 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ersatzfeder für Crimpwerkzeuge

  HOZAN

  [Features]
  · A replacement part for crimping tools. Contains one of each type (two types).
  · Compatible Models: P-715/732/733/736/737/740/743

  • Mengenrabatt

  ab∗ ：	2.97 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...