METROL Kontaktschalter（Ausführung：Stifthub, Ausführung）

?* Informationen zur Lieferzeit und Preisen

• 

  Präzisionstastschalter CS / CSJ / CSS / CSK / CSP (CS)

  METROL

  [Features]
  · Parallel use slim design with abundant variation
  · M5 to /long stroke waterproof

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	40.06 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Ultramini Präzisionstastschalter (PT)

  METROL

  [Features]
  M5 or ø5, smallest size is 17 mm
  · The accuracy of repetition of the operating point can be between 1μm/3μm (range)

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	72.61 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Präzisionstastschalter (CSM)

  METROL

  [Features]
  · Rectangular
  · Can be fitted in confined spaces or small equipment
  · Long strokes (1.5 mm).
  · Contradictory to the switch with attached stopper mini STM, the stroke end does not have a stopper function.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	51.85 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Mini-Anschlagschraube mit Schalter (STM)

  METROL

  [Features]
  A mini switch of ø8×8 mm, that is small in size, having quench stopper.
  · Suitable for confined spaces
  · Miniaturization of equipment and appliance which is cost-effective
  · For straight and deflected angle
  · The movable part will move frictionless on the flat spring and hence galling of the movable parts does not occur.
  · The waterproof type (IP67) is not only for the movable part, but the surface of the stopper and the interior of the rubber boot is also dust proof.
  · The standard size of the mounted parts is so accurate that replacement is very easy.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	29.62 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Hochpräzisionstastschalter P08 / P10 / P12 (MT)

  METROL

  The discretion at the operating point is lesser and it can sustain even adverse environment. (IP67)
  
  [Features]
  · the discretion at the operating point is lesser.
  · The accuracy of repetition is 0.5 μm (range)
  · Judgment errors due to incorrect signal and short-period stop gets minimized
  · Can even be used in harsh conditions.
  · An IP67 highly waterproof construction.
  · No differential response
  · Detection of minute displacement can be done continuously.
  · The signal does not drift due to power supply voltage or self‐heating
  · The switch is unaffected by low current and low voltage, however using it within rated range will ensure long life. (3 million times).

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	88.43 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Präzisionstastschalter für Berührung im Winkel CSHP

  METROL

  [Features]
  · M8 ultra-fine. Positioning at the deflected angle with waterproof specifications.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	99.37 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federplunger mit Schalter (SP)

  METROL

  [Features]
  1 unit dual roles. The spring plunger has an in-built positioning switch.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery.
  · Since it is specifically meant to confirm the spring action, it moves substantially until the start of the operation.
  Since there is substantial movement after the operation "Escape," setting the signal is easy and there is no fear of damage even when force is applied while pushing.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	44.85 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Anschlagschraube mit Schalter (ST)

  METROL

  [Features]
  1 unit dual roles. The stopper bolt has an in-built positioning switch.
  · Reduction in the number of parts and design man-hour. Ensures miniaturization of the machinery
  · Since the parts of th switch are cartridge type, the maintenance cost can be reduced drastically.
  · Anybody can replace the switch easily.
  · Eliminates the need for repairs.
  · No damage is caused to the switch even if the chord gets twisted or pulled while fixing the switch into the machine and the operation can be performed easily.
  · Improves the efficiency of the machine MTTR and the time required for "repairs" (for example: short-period stop) also reduces drastically.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	41.15 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Präzisionstastschalter CSH

  METROL

  [Features]
  A linear bushing is used for the bearing· and it is applicable to sliding, deflection and off-set

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	73.06 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Hochpräzisionstastschalter P11 (MT)

  METROL

  [Features]
  Since the fine adjustment mechanism for mounting and signal settings does not exist, it is used for detecting the origin of the moving or displaced object.
  · The tool setter of NC machine is set parallel at 0.01 mm degrees to the connector. (it can be used or thermal displacement correction)
  .

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	100.84 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Schalter mit geringer Berührungskraft (CSF)

  METROL

  [Features]
  A low contact force of 0.1N.

  • Mengenrabatt

  ab∗ ：	41.04 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Temperaturbeständige Schalter (HT)

  METROL

  [Features]
  The maximum temperature for continuous operation lies at 150°C/200°C
  Plastic parts that are heat-resistant, adhesives for high temperature and heat-resistant chord have been used.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	136.54 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hochvakuum-Schalter (GN)

  METROL

  [Features]
  · Can sustain high degree of vacuum 10^-5Pa.

  • Mengenrabatt

  ab∗ ：	191.15 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Hochpräzisionstastschalter (MT)

  METROL

  [Features]
  A direct acting type ball bearing is used in the bearing which is applicable for sliding, deflection and off-set.

  • Mengenrabatt

  ab∗ ：	178.32 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Präzisionstastschalter für N.i.O.-Teile (CSC)

  METROL

  [Features]
  · Low cost and also useful in determining the defective products.
  · Cost effective since sequencer is not required.
  · The range that has been approved can also be adjusted.

  • Mengenrabatt

  ab∗ ：	148.95 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...