MIRAI INDUSTRY Kunstharzschläuche Optionen

?* Informationen zur Lieferzeit und Preisen

• 

  Wandabdeckung für Kabelkanal-Zubehör

  MIRAI INDUSTRY

  [Features]
  Wall duct use wall cover for use at points where cable exits from wall. (Combination indoor/outdoor use).

  • Mengenrabatt

  ab∗ ：	6.38 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PF-Rohrbefestigung mit Schelle mit einseitiger Befestigung, Edelstahl (Montagebefestigung)

  MIRAI INDUSTRY

  [Features]
  Used to anchor PF tubes and the like onto roof tiles.
  This is optimal for locations that are difficult to anchor with nails because this type is anchored with adhesive.

  ab∗ ：	3.61 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schelle mit einseitiger Befestigung, für PF-Rohre【1-50 Stk. pro Packung】

  MIRAI INDUSTRY

  [Features]
  ・When you use PF pipe in an exposed piping format, this single-sided saddle can be used for fixing it in place.
  ・Can be firmly fixed in place with a single screw.
  ・Includes a screw hole for fixing the unit in place temporarily.

  • Mengenrabatt

  ab∗ ：	1.26 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CP-Adapter (zur Verwendung mit CD-Rohren)

  MIRAI INDUSTRY

  [Features]
  ·For CD pipes and thin steel electrical conduits (with screws or without screws).
  · CP adapters (G type) used in a mutually connected manner.

  • Mengenrabatt

  ab∗ ：	3.81 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder mit Knick (45°) für PF-Schläuche

  MIRAI INDUSTRY

  [Features]Bent connector for PF tube (45° JIS C8412·G).
  · Convenient for wiring, etc. that avoids wiring or rebar in horizontal knockouts when the position of the box is low.
  · Connection and release are both possible with just one touch.

  • Mengenrabatt

  ab∗ ：	3.42 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schelle mit zweiseitiger Befestigung für PF-Schläuche (Verwendung mit Mira-Flex SS) 【1-50 Stk. pro Packung】

  MIRAI INDUSTRY

  Saddle clamp (with rib) for PF tubing.
  
  [Features]
  · The protrusion on the inside of the saddle clamp bites into the tubing recess. This secures the tube firmly in place and prevents it from shifting.

  • Mengenrabatt

  ab∗ ：	1.20 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  VE-Schellen mit zweiseitiger Befestigung (VE-Schlauch, TL-Schlauch) 【1-50 Stk. pro Packung】

  MIRAI INDUSTRY

  [Features]
  Rigid PVC wire tube (J-tube).
  Both saddles used for the TL-tube.

  • Mengenrabatt

  ab∗ ：	1.12 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schlauchkappe (Endkappe, für CD-Schläuche)

  MIRAI INDUSTRY

  This end cap is used to prevent leaks, as well as waste and other foreign materials from entering CD pipes, as well as to protect the pipe ends.
  
  [Features]
  · Used to prevent foreign matter such as grease and dirt from entering the CD pipe and PF pipe, and to protect the terminals.

  ab∗ ：	1.12 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verbindungsstück mit Knick

  MIRAI INDUSTRY

  [Features]
  Normal bend for rigid PVC wire tube (J-tube) (JISC8432).

  • Mengenrabatt

  ab∗ ：	2.33 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Masthalter-Band zum Festziehen mit Metallschnallen【10 Stk. pro Packung】

  MIRAI INDUSTRY

  [Features]
  · Robust, ratchet type stainless steel band easily and securely fixable clamp, and firmly affixes to poles and pillars. (Band only, clamp sold separately.).
  · Band only comes in a convenient plastic case for storage.
  • The pole band protective cover insulates the pole band from the target, and prevents static electricity.

  • Mengenrabatt

  ab∗ ：	36.43 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Abdeckaufsatz für Kabelkanal-Zubehör

  MIRAI INDUSTRY

  [Features]
  Used in locations where cables are pulled in from drop ceilings.

  • Mengenrabatt

  ab∗ ：	6.97 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabelkanalführungs-Zubehör, Fehlstellung des Kabelkanals

  MIRAI INDUSTRY

  Angled corner bracket used for guide ducts when connecting corner locations (combined indooroutdoor use).
  
  [Features]
  · For mutual connections.
  When cable is used to place a load on the cover, pan-head tapping screws can be used to anchor the cover.

  • Mengenrabatt

  ab∗ ：	6.58 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  T-Stück-Zubehör für ausgeformte Kabelkanäle

  MIRAI INDUSTRY

  [Features]
  · These are tees for use with duct branches of molding ducts (both indoor and outdoor use).

  • Mengenrabatt

  ab∗ ：	9.15 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder Nr. 2【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  No. 2 connector used for rigid PVC wire tube (J-tube).
  
  [Features]
  1416 S type can also be mounted to a 16 knock hole (φ22 mm), knock diameter (φ22 mm φ27 mm).
  Compact type for combined use.

  • Mengenrabatt

  ab∗ ：	1.81 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CD-Schlauchverbinder (Ausführung G) 【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  Couplings (G-type) for CD/PF pipe-to-pipe connections.
  
  [Features]
  · Used in pipe-to-pipe connections.
  · Connection and release are both possible with just one touch. Slim straight type.

  • Mengenrabatt

  ab∗ ：	1.67 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CD-Rohrsteckverbinder (Ausführung G) 【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  This is a CD tube connector. Can instantly perform connection and unlocking. Cap attachment prevents intrusion of non-solidified concrete.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · Attached cap prevents intrusion of unsolidified concrete.

  • Mengenrabatt

  ab∗ ：	1.74 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CD-Schlauchsteckverbinder mit Knick (45°)

  MIRAI INDUSTRY

  [Features]
  · Convenient for piping, etc., to avoid laterally knocking the pipes and reinforcing bars if the box is positioned low down. Connect/unlock in one go.

  ab∗ ：	3.42 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CP-Adapter (zur Verwendung mit PF-Schläuchen)

  MIRAI INDUSTRY

  [Features]
  ·For PF pipes and thin steel electrical conduits (with screws or without screws).
  · CP adapters (G type) used in a mutually connected manner.

  • Mengenrabatt

  ab∗ ：	3.81 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  F-Endstück (zur Verwendung mit PF-Schläuchen mit Schraube) , Ausführung G

  MIRAI INDUSTRY

  [Features]
  · For use with VVF cable false ceiling connections where sensors, etc. are mounted.
  · Four colors.
  · Useful for identifying complex wiring arrangements, etc. (Size 36 excluded). Can be fixed using a single screw.
  · Equipped with seal for preventing intrusion of unset cement.

  • Mengenrabatt

  ab∗ ：	2.26 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  GP-Adapter (zur Verwendung mit PF-Schläuchen ohne Schrauben) , Ausführung G

  MIRAI INDUSTRY

  [Features]
  · CD pipe, PF pipe, and thick steel conduit pipe (non-threaded).
  · Used in a mutually connected manner.
  · Used for PF pipes and thick steel conduit pipe (without screws).
  · This GP adapter (G-type) provides mutual connections.

  ab∗ ：	4.22 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PF-Rohrverbinder (Ausführung G) 【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  [Features]
  - Coupling (G type) used for connecting PF pipes together.

  • Mengenrabatt

  ab∗ ：	0.98 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PF-Schlauchsteckverbinder (Ausführung G) 【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  This is a PF tube connector (JIS C8412/G type). The color of this product is beige.
  
  [Features]
  · Connection and release are both possible with just one touch. A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  • Mengenrabatt

  ab∗ ：	4.81 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PF-Rohrsteckverbinder (Ausführung G) , grau【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  This is a PF tube connector (JIS C8412/G type). The color of this product is gray.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  • Mengenrabatt

  ab∗ ：	1.74 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PF-Rohrsteckverbinder (Ausführung G) , milchweiß

  MIRAI INDUSTRY

  This is a PF tube connector (JIS C8412/G type). The color of this product is milky white.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  ab∗ ：	1.74 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PF-Rohrsteckverbinder (Ausführung G) , wasserdichte Ausführung【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  This is a PF tube connector (waterproof/exclusively for Miraflex SS/G type). The color of this product is gray.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  • Mengenrabatt

  ab∗ ：	2.58 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  TS-Kupplung (gerade Ausführung) 【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  [Features]
  This is a TS coupling (straight type JISC8432) unit for use with rigid vinyl electrical conduits.

  • Mengenrabatt

  ab∗ ：	1.49 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  VE-Schelle mit einseitiger Befestigung【1-50 Stk. pro Packung】

  MIRAI INDUSTRY

  [Features]Rigid PVC wire tube (J-tube) · TL tube for half saddle use.
  · Can be firmly attached with a single screw.
  · Can also be used as a saddle end stop.
  · Nylon type suitable for internal machinery use.

  • Mengenrabatt

  ab∗ ：	1.28 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Endabdeckung (Standardausführung für CD-Rohre)

  MIRAI INDUSTRY

  [Features]
  ·This is an end cover for CD pipes (G-type) that can be used for operations such as pulling cable into two-layer ceilings.
  · Connection and release are both possible with just one touch.

  • Mengenrabatt

  ab∗ ：	2.57 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Endabdeckung (Standard für PF-Rohre)

  MIRAI INDUSTRY

  [Features]
  ·This is an end cover for PF pipes (G-type) that can be used for operations such as pulling cable into two-layer ceilings.
  · Connection and release are both possible with just one touch.

  • Mengenrabatt

  ab∗ ：	2.57 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Endabdeckung 45 (für PF-Schläuche, Ausführung 45°)

  MIRAI INDUSTRY

  [Features]
  · PF tube end cover use for wall-side installations etc. (45° · G type).
  · Product intermediate between an end cover (standard type) and a temporary frame bushing.
  · Connection and release are both possible with just one touch.

  • Mengenrabatt

  ab∗ ：	2.74 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aufsatzkappe

  MIRAI INDUSTRY

  [Features]
  Entrance cap for rigid PVC wire tube use (J-tube) (JISC8432).

  • Mengenrabatt

  ab∗ ：	5.40 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aufsatzkappe (separat)

  MIRAI INDUSTRY

  [Features]
  · A split outlet type for easy wiring.
  · Entrance cap (separate JIS C8432) for rigid PVC wire conduit (J Tube).

  • Mengenrabatt

  ab∗ ：	6.58 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kombinationskupplung (CD-Wellschlauch, einlagig ⇔ VE-Schlauch)

  MIRAI INDUSTRY

  [Features]
  Combination coupling between single-layer CD corrugated tube and VE tube.

  • Mengenrabatt

  ab∗ ：	1.70 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kombinationskupplung (PF-Schlauch ⇔ VE-Schlauch)

  MIRAI INDUSTRY

  [Features]
  Combination coupling between PF tube and VE tube.

  • Mengenrabatt

  ab∗ ：	1.67 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schlauchkappe (Endkappe, für PF-Schläuche)

  MIRAI INDUSTRY

  This end cap is used to prevent leaks, as well as waste and other foreign materials from entering PF pipes, as well as to protect the pipe ends.
  
  [Features]
  · Used to prevent foreign matter such as grease and dirt from entering the CD pipe and PF pipe, and to protect the terminals.

  ab∗ ：	1.12 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Neues F Koro-Endstück (Schraubbefestigung, für CD-Schläuche mit Ummantelung)

  MIRAI INDUSTRY

  With just a single nail, CD pipes can be anchored in place. This is an end cover (screw nails included) for use with VVF rolling wiring.
  
  [Features]
  · Can be secured simply by simply hammering in a single nail.
  ·The compact size makes construction a breeze even in confined spaces.
  · Includes a seal for preventing leakage.

  ab∗ ：	1.99 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Masthalter-Band【1-10 Stk. pro Packung】

  MIRAI INDUSTRY

  Durable stainless steel band.
  
  [Features]
  • Can be easily mounted to a variety of instruments with wood screws, including meter plates, meter boxes, switch boxes, temporary switch boxes, wiring devices, and fluorescent lights.
  • Because this is a sturdy stainless steel band, it can be fixed firmly in place on poles and other surfaces.

  • Mengenrabatt

  ab∗ ：	6.97 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Masthalter-Band (für Edelstahlbänder)

  MIRAI INDUSTRY

  A pole mount for mounting stainless steel bands to steel poles or concrete posts .
  
  [Features]
  · A pole mount for mounting stainless steel bands to steel poles or concrete posts, etc.
  · Various types of box equipment can be easily mounted with wood screws.
  · No welding is required — a clamp and stay are included it can also be used for opening holes in steel tubes.
  · Can be connected directly to the extendable pole (MRD-63Y) (using the mounting fittings for the box included [except for POB-F and POB-1F]).

  • Mengenrabatt

  ab∗ ：	6.38 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Eckgelenk-Zubehör, für ausgeformte Kabelkanäle

  MIRAI INDUSTRY

  [Features]
  · This corner joint is used as a cosmetic cover for molding ducts in corner areas where cables are pulled in, such as ceilings and walls (for both indoor and outdoor use).
  · The 60 model can also be connected to free joints (bellows).
  · The 60 model can be used for connection of molding ducts between 60 models and 100 models.

  • Mengenrabatt

  ab∗ ：	8.56 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schelle für Kabelleisten-Zubehör

  MIRAI INDUSTRY

  [Features]
  · Cable protector duct saddle used for duct crosscut reinforcements, deformation prevention, and concealing joined sections with cover.
  · Can be used for the intermediate part and connections of the free joint.

  • Mengenrabatt

  ab∗ ：	3.02 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabelkanal-Endstückzubehör für ausgeformte Kabelkanäle

  MIRAI INDUSTRY

  This duct end is used for the ends of molding ducts (both outdoor and indoor use). Includes a knock unit for pulling out cables. Can be used for connecting VE pipes and PF pipes.
  
  [Features]
  · Used for the ends of ducts.
  ·Includes a knock unit for pulling out cables.
  ·Can be used for connecting VE pipes and PF pipes.

  • Mengenrabatt

  ab∗ ：	2.83 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabelkanal-Abdeckungszubehör mit Knick, für ausgeformte Kabelkanäle

  MIRAI INDUSTRY

  This duct bend for molding ducts is used for corners and other bending positions (both indoor and outdoor use).
  
  [Features]
  · Used for corners and other bending positions.
  · Model 60 can also be connected to free joints (bellows).

  • Mengenrabatt

  ab∗ ：	6.58 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabelkanal-Abdeckungszubehör mit innenliegendem Knick, für ausgeformte Kabelkanäle

  MIRAI INDUSTRY

  [Features]
  · This is a duct inside corner for use with corner connections of molding ducts (both indoor and outdoor use).

  • Mengenrabatt

  ab∗ ：	6.58 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Universalgelenk-Zubehör, für ausgeformte Kabelkanäle

  MIRAI INDUSTRY

  [Features]
  This is a free joint fitting for use with molding ducts that are flexible and compatible with uneven surfaces (both indoor and outdoor use). Can be anchored in place with a saddle.

  • Mengenrabatt

  ab∗ ：	12.95 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Abdeck-Gleitaufsatz für Kabelkanal-Zubehör

  MIRAI INDUSTRY

  [Features]
  Use for cable sliding part.
  · Model 100 can also be connected to free joints (bellows).

  • Mengenrabatt

  ab∗ ：	4.61 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...