THK Kugelgewindetriebe（Ausführung：Präzisionsklasse）
Eingeschränkte Suche durch Präzisierung Ausführung - Montage
-
Quadraflansch -
Rundflansch -
Rundflansch, abgeflacht -
Wagen -
Kompaktflansch
?* Informationen zur Lieferzeit und Preisen
-
Kugelgewindetriebe / BIF / Rundflansch / Ø 16 - 25 / Steigung 5 - 12 / C5, C7 / 1×1.5, 1×2.5, 2×2.5 / geschliffen
THK
- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,241.52 € Minimum Lieferzeit ： 23 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / MDK / Kompaktflansch / Ø 4 - 14 / Steigung 1 - 5 / C3, C5, C7 / 3x1
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.- 2D / 3D CAD Daten verfügbar
ab∗ ： 590.04 € Minimum Lieferzeit ： 23 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 4 / Steigung 1 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,395.49 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 8 / Steigung 1 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
[Dust-proofing and lubrication.]
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- 2D / 3D CAD Daten verfügbar
ab∗ ： 646.49 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 14 / Steigung 2 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.- 2D / 3D CAD Daten verfügbar
ab∗ ： 725.12 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 10 / Steigung 2 / C3, C5, C7 / vorgespannt, Spiel / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 800.37 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 20 / Steigung 10 / C5, C7 / 1×2.5 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- 2D / 3D CAD Daten verfügbar
ab∗ ： 902.97 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 12 / Steigung 5 / C3, C5, C7 / 1×2.5 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
· BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.- 2D / 3D CAD Daten verfügbar
ab∗ ： 602.00 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 25 / Steigung 20 / C5, C7 / 2×1.8 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,812.75 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 6 / Steigung 1 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,015.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 12 / Steigung 2 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 914.95 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Kompaktflansch / Ø 10 / Steigung 10 / C5, C7 / 1×1.5 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,038.07 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 10 / Steigung 2 / C3, C5, C7 / 1×2.5 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.- 2D / 3D CAD Daten verfügbar
ab∗ ： 665.29 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 15 / Steigung 10 / C5, C7 / 2×2.8 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,032.94 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 15 / Steigung 20 / C5, C7 / 2×1.5 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,150.95 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 20 / Steigung 20 / C5, C7 / 2×1.8 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,267.25 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 8 / Steigung 2 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 829.47 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 14 / Steigung 4 / C3, C5, C7 / 3×1 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 663.55 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 14 / Steigung 8 / C5, C7 / 1×2.5 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.- 2D / 3D CAD Daten verfügbar
ab∗ ： 990.20 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelgewindetriebe / BNK / Rechteckflansch / Ø 16 / Steigung 16 / C5, C7 / 2×1.8 / geschliffen
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
· BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.- 2D / 3D CAD Daten verfügbar
ab∗ ： 1,210.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit ： |
| Ausführung |
| Ausführung - Montage |
| Präzisionskategorie |
| [d] Durchmesser - Schraubenschaft(mm) |
| Steigung(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Artikelserie | Kugelgewindetriebe / MDK / Kompaktflansch / Ø 4 - 14 / Steigung 1 - 5 / C3, C5, C7 / 3x1 | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 4 / Steigung 1 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 8 / Steigung 1 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 14 / Steigung 2 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 20 / Steigung 10 / C5, C7 / 1×2.5 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 12 / Steigung 5 / C3, C5, C7 / 1×2.5 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 25 / Steigung 20 / C5, C7 / 2×1.8 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 6 / Steigung 1 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 12 / Steigung 2 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Kompaktflansch / Ø 10 / Steigung 10 / C5, C7 / 1×1.5 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 10 / Steigung 2 / C3, C5, C7 / 1×2.5 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 15 / Steigung 10 / C5, C7 / 2×2.8 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 15 / Steigung 20 / C5, C7 / 2×1.5 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 20 / Steigung 20 / C5, C7 / 2×1.8 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 8 / Steigung 2 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 14 / Steigung 4 / C3, C5, C7 / 3×1 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 14 / Steigung 8 / C5, C7 / 1×2.5 / geschliffen | Kugelgewindetriebe / BNK / Rechteckflansch / Ø 16 / Steigung 16 / C5, C7 / 2×1.8 / geschliffen | ||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ab∗ | 1,241.52 € *Stückpreis Standardkonfiguration | 590.04 € *Stückpreis Standardkonfiguration | 1,395.49 € *Stückpreis Standardkonfiguration | 646.49 € *Stückpreis Standardkonfiguration | 725.12 € *Stückpreis Standardkonfiguration | 800.37 € *Stückpreis Standardkonfiguration | 902.97 € *Stückpreis Standardkonfiguration | 602.00 € *Stückpreis Standardkonfiguration | 1,812.75 € *Stückpreis Standardkonfiguration | 1,015.87 € *Stückpreis Standardkonfiguration | 914.95 € *Stückpreis Standardkonfiguration | 1,038.07 € *Stückpreis Standardkonfiguration | 665.29 € *Stückpreis Standardkonfiguration | 1,032.94 € *Stückpreis Standardkonfiguration | 1,150.95 € *Stückpreis Standardkonfiguration | 1,267.25 € *Stückpreis Standardkonfiguration | 829.47 € *Stückpreis Standardkonfiguration | 663.55 € *Stückpreis Standardkonfiguration | 990.20 € *Stückpreis Standardkonfiguration | 1,210.79 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 23 Arbeitstage | 23 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
| Ausführung | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse | Präzisionsklasse |
| Ausführung - Montage | Rundflansch | Kompaktflansch | Rundflansch, abgeflacht | Rundflansch, abgeflacht | Rundflansch, abgeflacht | Rundflansch, abgeflacht | Quadraflansch | Quadraflansch | Quadraflansch | Rundflansch, abgeflacht | Rundflansch, abgeflacht | Quadraflansch | Quadraflansch | Quadraflansch | Quadraflansch | Quadraflansch | Rundflansch, abgeflacht | Rundflansch, abgeflacht | Quadraflansch | Quadraflansch |
| Präzisionskategorie | C5 | C5 | C3 | C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C5 / C7 | C3 / C7 | C5 / C7 | C3 / C5 | C3 / C5 | C5 / C7 | C3 / C5 | C5 / C7 | C5 | C5 | C3 / C5 | C3 / C5 | C5 | C5 |
| [d] Durchmesser - Schraubenschaft(mm) | 20 ～ 40 | 12 ～ 14 | 4 | 8 | 14 | 10 | 20 | 12 | 25 | 6 | 12 | 10 | 10 | 15 | 15 | 20 | 8 | 14 | 14 | 16 |
| Steigung(mm) | 5 ～ 10 | 2 ～ 4 | 1 | 1 | 2 | 2 | 10 | 5 | 20 | 1 | 2 | 10 | 4 | 10 | 20 | 20 | 2 | 4 | 8 | 16 |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung
-
Präzisionsklasse
-
Standardklasse
-
Einzelbauteile
-
Präzisionsklasse
-
Präzisionskategorie
- C3
- C5
- C7
- C10
Schlagen Sie in den Genauigkeitsstandards des jeweiligen Herstellers nach.
-
[d] Durchmesser - Schraubenschaft(mm)
-
Steigung(mm)
Suchergebnisse durch Herstellerauswahl einschränken
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Eingeschränkte Suche durch Präzisierung der Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 4 Tage oder weniger
- 5 Tage oder weniger
- 6 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 9 Tage oder weniger
- 10 Tage oder weniger
- 12 Tage oder weniger
- 13 Tage oder weniger
Beispiele, wie Sie diese Komponenten verwenden können
Weitere Kategorien aus dem Produktbereich Kugelgewindetriebe
-
- Linearwellen
- Wellenhalter
- Linearkugellager
- Kugelführungen
- Kugelnutwellen / Drehmomentwellen
- Linearführungen / Wälzführungen
- Energieketten
- Kugelgewindetriebe
- Lagergehäuse für Gewindetriebe
- Trapezgewindetriebe / Gleitgewindetriebe
- Kreuzrollenführungen (linear / rotativ)
- Gleitschienenführungen, V-Schienenführungen, Laufrollenführungen
- Aktuatoren
- Schlittenführungen
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.