YANASE Scheiben
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
SG Sisal-Scheibe, 100 Stk.
YANASE
Ideal for the process before mirror finishing. Features outstanding heat dissipation as well.
[Features]
· For the final finish before a mirrored surface.
· Boasts a beautifully polished surface.
· Ideal for the process prior to mirror finish, taking advantage of a characteristic of sisal hemp, coarse fiber.
· Features outstanding heat dissipation as well.- Mengenrabatt
ab∗ ： 24.33 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
GP Sander Filz weich 100x25xM10
YANASE
Can be used with abrasive applied for a mirror finish or used as is for wiping.
[Features]
· For polishing/wiping a mirrored surface finish.
· Applying an abrasive (blue bar) and polishing results in a mirror finish.- Mengenrabatt
ab∗ ： 40.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Schleif- und Polierscheibenset „One Shot“, 100 Stk.
YANASE
Shows its power during pre-buffing processes.
[Features]
· Shows its power during pre-buffing processes.
· This is a new type of polishing material created by impregnating Unilon fibers with abrasive to which foamed urethane is then applied.
· It is elastic so that a beautiful finished surface is achieved, without leaving any deep scratches.- Mengenrabatt
ab∗ ： 36.62 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylonscheibe (S / M)
YANASE
Ideal for blurring scratches and cleaning.
[Features]
· For blurring scratches and cleaning.
· Polishing without making deep scratches.
· Flexible and fits perfectly to curved surfaces as well.
· We also manufacture a straight type with soft contact.
· Abrasive grain-free type containing no abrasive grains can also be manufactured- Mengenrabatt
ab∗ ： 16.36 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
One-Touch Happy Schleifscheibe TOP 100xM10
YANASE
One-touch screw type. Delivers high performance at a low price.
[Features]
· One-touch screw type. High performance at a low cost.
· No clogging or burning.
· Quiet grinding noise- Mengenrabatt
ab∗ ： 22.98 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schleifscheibe „GP Sander“, NYLON, 100x25xM10
YANASE
Grinds softly.
[Features]
· Polishes the surface softly.
· For sealer sanding of woodwork curved surfaces.
· For hairline machining of stainless steel and aluminum.
· For finishing woodworking and coated surfaces.
· It is also ideal for satin finishing.- Mengenrabatt
ab∗ ： 21.51 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Polierscheibe Baumwolle, 100 Stk.
YANASE
For using between the pre-mirror processing sisal and the final mirrored finish felt. Use for the final pre-processing before mirror finishing.
[Features]
· As cotton cloth is used, it gives the best finishing.
· A pleasant texture with excellent usability and soft contact on polished materials for a uniform texture.
· The high density of the fiber produces an even more beautiful finish than an SG sisal disc- Mengenrabatt
ab∗ ： 34.84 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Lamellenschleifteller TOP 100x15【1-5 Stk. pro Packung】
YANASE
Ideal for medium polishing. No clogging, and burns are also unlikely.
[Features]
· A dynamo popular with various users.
· Supports metals as well as stone materials and glass. 4 types of abrasives are available. Select the product depending on the usage.
· Previously, when removing various types of beads, polishing with abrasive paper was done after grinding with offset grinding stone, but now it is possible to both grind and polish with TOP discs.
· Ideal for medium polishing.
· Little clogging.
· Very limited scorching.- Mengenrabatt
ab∗ ： 12.28 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
GP Sander Papierrad 100x25xM10
YANASE
[Features]
· The flexibility of the paper enables soft polishing.
· No clogging, allowing a uniform finish to be achieved throughout.
· It is elastic so a close fit is achieved.
· It is not exothermic and does not alter the polished material.
· Easily attaches directly to grinders and can also be used as a disc.- Mengenrabatt
ab∗ ： 18.04 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Cool-Top, 100 Stk.
YANASE
[Features]
· Highly effective air cooling. Scorching is prevented to ensure a long operational life.
· Air enters by turning, and burning is reduced due to air cooling effect.
· Made as a block type to ensure that a new blade always comes out.
· Polishing cloth usage amount is the same as normal discs- Mengenrabatt
ab∗ ： 12.70 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Filzscheibe, 100 Stk., weich
YANASE
Ideal for final mirror finishing after pre-mirror finish treatment with a cotton disc.
[Features]
· At last, the final process: mirror finishing.
· Ideal for finish polishing mirrored surfaces to reflect objects with the clarity of mirrors.
· The soft type is especially suitable for soft metal such as copper and aluminum.
· Use with application of abrasive.- Mengenrabatt
ab∗ ： 18.46 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Nylon schwarz, 100 Stk., weich
YANASE
Wipes away coating and rust without shaving the base material.
[Features]
· Wipes away coating and rust without shaving the base material.
· Allows work to be performed safely without the scattering of a wire brush.
· No deep scratches.
· An attractive finished surface.
· Has excellent polishing power- Mengenrabatt
ab∗ ： 16.45 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Feinschleifpapier 100x15
YANASE
Ideal for removal of rust, coating, and spot welding.
[Features]
· Rust is no problem at all.
· For removal of rust and paint.
· Scratch blurring.
· For spot welding stripping and deburring- Mengenrabatt
ab∗ ： 15.94 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Haftpolierscheibe, Gewebe
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.
[Features]
· Paper disc for polishing.
· For polishing and pre-polishing general metals and wood materials, and cleaning metal surfaces.- Mengenrabatt
ab∗ ： 2.91 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG PVA Scheibe 100 Stk.
YANASE
Supports various materials and applications with a wide range of products and provides even grinding performance.
[Features]
· Highly useful for removing small scratches.
· Ideal for scratch removal and descaling of general metals, and finish polishing of stainless steel.
· Also ideal for chamfering and finishing stone and tile- Mengenrabatt
ab∗ ： 17.04 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Yanase TOP, 100 Stk.
YANASE
Causes little vibration and noise for easy work, safe and efficient use.
[Features]
· W type where long and short sandpaper pieces are arranged alternately.
· Previously, when removing various types of beads, polishing with abrasive paper was done after grinding with an offset grinding stone, but now it is possible to grind and polish with a single piece.
· Ideal for medium polishing.
· Little clogging.
· Very limited scorching.- Mengenrabatt
ab∗ ： 11.48 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 5.46 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Uni Top Typ 15 100x15
YANASE
[Features]
· Selectable from abundant abrasive grain and sizes.
· Supports metals as well as stone materials and glass.
· 4 types of abrasives are available.
· Select the product depending on the usage.
· The back-up base is elastic with relatively good deflection, making this product easy to use.
· Type 15: Paper length is 15 mm.- Mengenrabatt
ab∗ ： 8.95 € Minimum Lieferzeit ： 11 Arbeitstage *Stückpreis Standardkonfiguration
-
Schleiftopf
YANASE
Soft contact, easy-to-use grindstone. Use for rough grinding of general steel, castings, and stainless steel. It can be attached to a small pneumatic/electric grinder for easy grinding.- Mengenrabatt
ab∗ ： 5.88 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Lamellenschleifteller TOP Mini Disc【1-5 Stk. pro Packung】
YANASE
Discs manufactured with polishing cloth surrounding the periphery. Unlikely to clog or burn, preventing heat distortion and enabling continuous work. "Autogenous" properties ensure a constant surface roughness from start to finish. Suitable for removal of spatter and beads after welding, metal deburring, rust removal and polishing.- Mengenrabatt
ab∗ ： 6.55 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Reinigungsscheibe SG Nylon schwarz / hart
YANASE
Wipes away coating and rust without shaving the base material.
[Features]
· Wipes away coating and rust without shaving the base material.
· Allows work to be performed safely without the scattering of a wire brush.
· No deep scratches.
· An attractive finished surface.
· Has excellent polishing power- Mengenrabatt
ab∗ ： 26.05 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Reinigungsscheibe, schwarz / weich
YANASE
Wipes away coating and rust without shaving the base material.- Mengenrabatt
ab∗ ： 10.39 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Lamellenschleifteller „Uni Top Mini Disc“
YANASE
The back-up base is elastic with relatively good deflection, making this product easy to use.
[Features]
· Discs manufactured with polishing cloth surrounding the periphery.
· Unlikely to clog or burn, preventing heat distortion and enabling continuous work.
· "Autogenous" properties ensure a constant surface roughness from start to finish.
· Suitable for removal of spatter and beads, metal deburring, rust removal, and polishing after welding.- Mengenrabatt
ab∗ ： 7.21 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Lamellenschleifteller „Happi“, TOP
YANASE
[Features]
· Low cost yet high performance. Yanase's No. 1 disc.
· Compared to the UNI Top disc, its paper specification is economical and reduce costs.
· Abundant particle sizes for rough cutting to semi-finished grinding.
· No clogging and unlikely to burn.
· There is also a screw type one-touch type "One-Touch Happy TOP"- Mengenrabatt
ab∗ ： 10.30 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Filzscheibe
YANASE
[Features]
· A disc made of high density compressed, strictly selected wool for polishing.
· Suitable for surface polishing.
· Applying an abrasive (blue bar / white bar, etc.) and polishing results in a mirror finish.- Mengenrabatt
ab∗ ： 3.39 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Diamant-Schleifscheibe, Galvanikbindung
YANASE
A disc where diamonds are electrodeposited on a thin copper sheet. Diamond grains protrude well and provide outstanding sharpness.- Mengenrabatt
ab∗ ： 16.22 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylonscheibe
YANASE
[Features]
· A disc made of special fiber of exceptional elasticity.
· Without biting, a smooth finished surface can be obtained.
· Little clogging and dust, capable of polishing both iron and non-ferrous metals.- Mengenrabatt
ab∗ ： 3.03 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
SG Nylon-Schleifscheibe (S / M)
YANASE
Ideal for blurring scratches and cleaning.
[Features]
· For blurring scratches and cleaning.
· Polishing without making deep scratches.
· Flexible and fits perfectly to curved surfaces as well.
· MIX type is a mixture of mesh polishing cloth and Unilon nonwoven fabric that makes clogging less likely to occur, increases service life, and improves polishing power- Mengenrabatt
ab∗ ： 14.77 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Polierring, Baumwolle, gerafft
YANASE
[Features]
· A general-purpose type buff that can be used for any polishing work and has excellent polishing power and surface resistance.- Mengenrabatt
ab∗ ： 28.97 € Minimum Lieferzeit ： 16 Arbeitstage *Stückpreis Standardkonfiguration
-
Polierteller
YANASE
[Features]
· The sponge achieves the best elasticity.
· Ideal for coating (spreading) wax or abrasives (compounds).- Mengenrabatt
ab∗ ： 17.83 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Type |
| work material |
| Outer diameter Dimensions(mm) |
| Inner Diameter Dimension(mm) |
| Thickness(mm) |
| Particle Size(#) |
| abrasive grain |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Artikelserie | ||||||||||||||||||||||||||||||
| ab∗ | 24.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 40.79 € *Stückpreis Standardkonfiguration Mengenrabatt | 36.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.48 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 26.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.83 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 11 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 16 Arbeitstage | 7 Arbeitstage |
| Type | Baumwolle: Hanfscheibe | Filzscheibe | Nicht gewebte Stoffscheibe | Nicht gewebte Stoffscheibe | Vielblattscheibe | Nicht gewebte Stoffscheibe | Baumwolle: Hanfscheibe | Vielblattscheibe | Vielblattscheibe | Vielblattscheibe | Filzscheibe | Nicht gewebte Stoffscheibe | Nicht gewebte Stoffscheibe | Schleifpapier | Kautschuk/harte Polyurethan-Scheibe | Vielblattscheibe | Vielblattscheibe | Vielblattscheibe | - | Vielblattscheibe | Nicht gewebte Stoffscheibe | Nicht gewebte Stoffscheibe | Vielblattscheibe | Vielblattscheibe | Filzscheibe | Diamantscheibe | Nicht gewebte Stoffscheibe | Nicht gewebte Stoffscheibe | Baumwolle: Hanfscheibe | Befestigungen/Sonstige |
| work material | Edelstahl[○] / Legierter Stahl[○] / Gusseisen[◎] | Edelstahl[◎] / Legierter Stahl[○] | Edelstahl[◎] / Legierter Stahl[○/◎] / Gusseisen[○] | Edelstahl[◎] / Kupferwerkstoff[◎] | Edelstahl[◎] | Edelstahl[○] / Legierter Stahl[◎] | Edelstahl[○] / Legierter Stahl[○] / Glaswerkstoff[◎] | Edelstahl[○] / Glaswerkstoff[○] | Edelstahl[○] / Gusseisen[◎] / Aluminium[◎] / Steinwerkstoff[◎] | Edelstahl[◎] | Gusseisen[◎] | Kupferwerkstoff[◎] / Aluminium[◎] / Steinwerkstoff[◎] | Edelstahl[○] / Gusseisen[◎] / Kupferwerkstoff[◎] / Aluminium[◎] / Steinwerkstoff[◎] | Stahl allgemein[◎] / Edelstahl[○/◎] / Gusseisen[○/◎] | Legierter Stahl[◎] / Gusseisen[○] / Glaswerkstoff[○] | Edelstahl[◎] | Stahl allgemein[◎] / Edelstahl[○/◎] / Gusseisen[○] | Stahl allgemein[◎] / Edelstahl[○] | - | - | Kupferwerkstoff[○] / Aluminium[○] / Steinwerkstoff[○] | Edelstahl[◎] / Aluminium[○] / Steinwerkstoff[○] | Stahl allgemein[◎] / Edelstahl[○/◎] / Gusseisen[◎] | Stahl allgemein[◎] / Edelstahl[○/◎] / Gusseisen[○] / Aluminium[○] | - | - | - | Edelstahl[◎] / Legierter Stahl[◎] / Aluminium[○/◎] / Steinwerkstoff[○] | - | - |
| Outer diameter Dimensions(mm) | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 30 | 100 | 100 | 100 | 100 | 30 | 30 | 100 | 100 | 58 | 100 ～ 180 | 30 | 30 | 30 | 100 | 100 | 125 |
| Inner Diameter Dimension(mm) | 15 | M10 | 15 | 15 | M10 | M10 | 15 | 15 | M10 | 15 | 15 | 15 | 15 | 10 | 15 | 15 | 15 | 15 | - | - | 15 | 15 | 10 | 15 ～ 22 | - | - | - | 15 | 9.53 | - |
| Thickness(mm) | - | 25 | - | - | - | 25 | - | - | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Particle Size(#) | - | - | 120 ～ 1000 | 120 ～ 600 | 100 | 600 ～ 1000 | - | 80 ～ 180 | 60 ～ 180 | 100 | - | - | - | 60 ～ 320 | 220 ～ 500 | 100 | 40 ～ 120 | 80 | 60 | 120 ～ 240 | - | - | 60 ～ 400 | 40 ～ 400 | - | 100 ～ 1000 | 120 ～ 320 | 120 | - | - |
| abrasive grain | Nicht verfügbar | Nicht verfügbar | Nicht verfügbar | Nicht verfügbar | Schleifkörper A | Nicht verfügbar | Nicht verfügbar | Schleifkörper Z / Siliziumcarbid-Schleifkörper | Schleifkörper A | Schleifkörper A | Nicht verfügbar | Nicht verfügbar | Nicht verfügbar | Schleifkörper A / Schleifkörper Z | Nicht verfügbar | Schleifkörper A | Nicht verfügbar | Schleifkörper A | - | - | Nicht verfügbar | Nicht verfügbar | Schleifkörper A | Schleifkörper A | - | - | - | Nicht verfügbar | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Type
-
work material
-
Outer diameter Dimensions(mm)
-
Inner Diameter Dimension(mm)
- 2
- 9.53
- 9.6
- 10
- M10
- M10(P1.5)
- 11
- φ11
- 12
- 12.7
- 15
- 15(16)
- 15.9
- 16
- 20
- 22
- 22.2
- 25.4
- -
-
Thickness(mm)
-
Particle Size(#)
- 14
- 16
- 20
- 24
- 30
- 36
- 36 Equivalent
- 40
- 46
- 46, 80, 120, 180, 240, 360
- 50
- 60
- 80
- 80 Equivalent
- 100
- GC#100
- 120
- 120 Equivalent
- #120
- 150
- 180
- 180 Equivalent
- 220
- #220
- 240
- 240 Equivalent
- #240
- 280
- 320
- 320 Equivalent
- #320
- 360
- 400
- 400 Equivalent
- #400
- 500
- 600
- 600 Equivalent
- 800
- 800 Equivalent
- 1000
- 1000 Equivalent
- 1500
- 2000
-
abrasive grain
- Schleifkörper A
- Schleifkörper WA
- Schleifkörper C
- Schleifkörper Z
- Schleifmittel GZ
- Schleifkörper AA
- Schleifkörper SZ
- E Schleifmittel
- Keramik-Schleifkörper
- Siliziumcarbid-Schleifkörper
- Nicht verfügbar
- Schleifkörper TC
Suchergebnisse durch Herstellerauswahl einschränken
-
- TRUSCO NAKAYAMA (58)
- ICHIGUCHI (39)
- YANASE (30)
- NEWREGISTON (14)
- SANKYO RIKAGAKU (6)
- NIHON SEIMITSU KIKAI KOSAKU (5)
- NORITAKE COATED ABRASIVE (4)
- RIKEN CORUNDUM (4)
- UHT (4)
- KOVAX (3)
- MINITOR (3)
- NAKANISHI (3)
- NIPPON RESIBON (3)
- TACT (3)
- MURAKO (2)
- NIHON KENSHI (2)
- PFERD (2)
- RESITON (2)
- BELL STAR ABRASIVE MFG (1)
- DREMEL (1)
- KURE GRINDING WHEEL (1)
- LOBTEX (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Scheiben
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.