Profilschienenführungen mit Wälzkörpern（Kugelausrichtung：4-reihig, rund）

?* Informationen zur Lieferzeit und Preisen

• 

  Profilschienenführungen / schwere Last / Wagendimensionen wählbar / hohe Güte

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Führungswagen für Profilschienen / R1651

  BOSCH REXROTH

  Hochpräzision Kugelführungswagen in der Bauform FNS.

  • Mengenrabatt

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	86.32 €
  Minimum Lieferzeit ：	70 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / mittelschwere Last / Wagendimensionen wählbar / normales Spiel / Co 8,2-19,6kN

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Profilschienen / R1605 / rostfreier Stahl

  BOSCH REXROTH

  Kugelschiene in der Bauform SNS

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	56 Arbeitstage

• 

  Profilschienenführungen / HRW / Material wählbar / breiter Wagen

  THK

  A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
  There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	15 Arbeitstage

• 

  Profilschienenführungen / SHS / Material wählbar / Wagendimensionen wählbar

  THK

  A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	15 Arbeitstage

• 

  Profilschienenführungen / HSR / Material wählbar / Wagendimensionen wählbar

  THK

  A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	14 Arbeitstage

• 

  Führungswagen für Profilschienen / SNS / kurzer Wagen

  BOSCH REXROTH

  Hochpräzision Kugelführungswagen in der Bauform SNS.

  • Mengenrabatt

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	82.00 €
  Minimum Lieferzeit ：	70 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / C-SX2R, C-SX2RL, C-SX2WT, C-SX2WTL, C-SXR, C-SXRL, C-SXWT, C-SXWTL / schwere Last / Wagendimensionen wählbar

  MISUMI

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Führungswagen für Profilschienen / R1653 / langer Wagen

  BOSCH REXROTH

  Hochpräzision Kugelführungswagen in der Bauform FLS.

  • Mengenrabatt

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	99.25 €
  Minimum Lieferzeit ：	70 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Miniatur-Profilschienenführungen / SHS-Typ

  THK

  A best selling THK product. The SHS series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	8 Arbeitstage

• 

  Profilschienenführungen / SBI-FL, SBI-FLL / breiter Wagen

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Profilschienenführungen / SHW / Material wählbar / breiter Wagen

  THK

  A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
  · The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
  · Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
  · The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	15 Arbeitstage

• 

  Profilschienenführungen / SSR / Material wählbar / Wagendimensionen wählbar

  THK

  Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	15 Arbeitstage

• 

  Führungswagen für Profilschienen / SHS / großer Wagen, Wagendimensionen wählbar

  THK

  An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
  ·
  · Cross-section

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	72.04 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Führungswagen für Profilschienen / SLS / kurzer Wagen

  BOSCH REXROTH

  Hochpräzision Kugelführungswagen in der Bauform SLS.

  • Mengenrabatt

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	94.52 €
  Minimum Lieferzeit ：	70 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / SSV□W□□, SSV□R□□, SSX□R□□, SSX□W□□ / rostfreier Stahl / mittlere, schwere Last / Wagen wählbar / Stiftbohrung

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Führungswagen für Profilschienen / SR / Kugelumlauf / Wagendimensionen wählbar

  THK

  An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled
  · in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	46.67 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / schwere Last / doppelt gedichtet / Wagendimensionen wählbar

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Führungswagen für Profilschienen / HSR / Material wählbar / Kugelumlauf / großer Wagen, Wagendimensionen wählbar

  THK

  An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	64.07 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienen / HRW / Material wählbar / breite Schiene

  THK

  We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HRW12 and 14LR types) each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) where there is action on the M block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	167.06 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / SR / Material wählbar / Wagendimensionen wählbar

  THK

  A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
  · The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
  · It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
  · LM block, LM rail, and LM rail are all compatible with stainless steel.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	15 Arbeitstage

• 

  Profilschienenführungen / mittelschwere Last / beisseitige Dichtung / Wagendimensionen wählbar / normales Spiel / Co 8,2-19,6kN

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Profilschienenführungen / SV2RN□□, SVRN□□, SX2RN□□, SXRN□□ / mittlere, schwere Last / Wagendimensionen wählbar / Stiftbohrung

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Führungswagen für Profilschienen / HRW / Material wählbar / Kugelumlauf / breiter Wagen, Wagendimensionen wählbar

  THK

  An individual block from the THK LM guide HRW series. Extremely useful for sudden design changes and when performing maintenance.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	104.99 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen, kosteneffizient / mittelschwere Last / Wagendimensionen wählbar / normales Spiel / Co 5,2-10,6kN

  MISUMI

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Führungswagen für Profilschienen / R1666

  BOSCH REXROTH

  • Mengenrabatt

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	65.60 €
  Minimum Lieferzeit ：	70 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Führungswagen für Profilschienen / SSR / Wagendimensionen wählbar

  THK

  An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
  · , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
  · Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	51.04 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / SBI-SL, SBI-SLL

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Führungswagen für Profilschienen / R1665 / kurzer Wagen / Präzisionsklasse wählbar

  BOSCH REXROTH

  • Mengenrabatt

  3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	69.03 €
  Minimum Lieferzeit ：	70 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Miniatur-Profilschienenführungen / Material wählbar / Wagendimensionen wählbar

  MISUMI

  • Bestellmengen erweitert (D-JIT)

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Führungswagen für Profilschienen / SHW / breiter Wagen, Wagendimensionen wählbar

  THK

  An individual block from the THK LM guide SHW series. Extremely useful for sudden design changes and when performing maintenance.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	125.20 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Profilschienenführungen / C-SH2R, C-SH2RL, C-SH2WT, C-SH2WTL, C-SHR, C-SHRL, C-SHWT, C-SHWTL / superschwere Last / Wagendimensionen wählbar

  MISUMI

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Profilschienenführungen / HSR-Modell / Kugelkette

  THK

  A best selling THK product. The HSR series can be used in any position.
  *When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
  (Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	8 Arbeitstage

• 

  Profilschienenführungen / SBI-HL, SBI-HLL / langer Wagen

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Profilschienenführungen / C-SE2R, C-SE2RL, C-SE2WT, C-SE2WTL, C-SER, C-SERL, C-SEWT, C-SEWTL / extrem schwere Last / Wagendimensionen wählbar

  MISUMI

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Profilschienenführungen / SR-M1-Typ

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	40 Arbeitstage

• 

  Profilschienenführungen / SBI-SV

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Miniatur-Schienenführungen mit Kugelkäfigen / EPF-Typ / hubbegrenzt / Senkbohrungen, Gewindebohrungen

  THK

  A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	25 Arbeitstage

• 

  Profilschienenführungen / SBI-CL, SBI-CLL / langer Wagen

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Profilschienenführungen / HSR-M1-Modell

  THK

  High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
  · The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
  · Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
  · A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
  · The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
  · Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	55 Arbeitstage

• 

  Profilschienenführungen / SBI-FV / kurzer Wagen

  SBC

  [Features]
  · The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
  · Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
  · Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.
  
  * When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
  (Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Please place your orders in this manner.

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Profilschienenführungen / SR-Typ / standard, breit, kurz - breit

  THK

  [Eigenschaften]
  Kompakte Ausführung mit geringer Querschnittshöhe, ideal für horizontale Führungen, da die Kontaktfläche der Kugel radiale Belastungen aufnimmt
  Da es sich um eine Ausführung mit automatischer Einstellung handelt, die die Parallelität der beiden Achsen und den Genauigkeitsfehler des Niveaus angemessen kompensieren kann, können hohe Präzision und glatte Bewegungen erzielt werden
  Der Rücklaufbereich jeder Kugel ist so gestaltet, dass die Kugeln gleichmäßig durch den Führungsteil der Endplatte laufen, so dass eine geräuscharme Rollbewegung erreicht wird
  Auch im Hinblick auf Vorspannung und exzentrisch Belastung ist der Differenzschlupf der Kugel gering; sie weist eine ausgezeichnete Abriebfestigkeit auf und es ist möglich, die Genauigkeit über eine lange Zeit aufrechtzuerhalten
  LM-Wagen, LM-Schienen und Kugeln können mit rostfreiem Stahl verwendet werden
  Auch wenn der LM-Wagen aus der LM-Schiene gezogen wird, verhindert die Halteplatte das Herunterfallen der Kugel

  2D / 3D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  Minimum Lieferzeit ：	8 Arbeitstage

Loading...