Spannlager / Gehäuse-Spannlager（Ausführung - Lagerblock：Standard）

?* Informationen zur Lieferzeit und Preisen

• • Sonderpreis

  

  Modell mit Gewindestiften, Einsatzlager und Zylinderloch, UC-Serie

  ASAHI SEIKO

  [Features]
  · Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	12.40 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Spannlager, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung B

  ASAHI SEIKO

  Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	11.36 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stehlager, Exzenterradstil, Edelstahl Silver, Eco-Serie MUSP-Modell

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	67.97 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aufwickeleinheit mit Rahmen, Ausführung mit zylindrischer Bohrung und Stellschrauben, Ausführung UCT200+WB

  ASAHI SEIKO

  Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	151.75 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Aufwickeleinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCT

  ASAHI SEIKO

  Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	25.96 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Patroneneinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCC

  ASAHI SEIKO

  Combines bearings with a cylindrical bearing box made of cast iron with the outer diameter surface given a grinding finish. The entire unit can be used in the same way as a general bearing, and it is suitable for a transmission shaft that expands and contracts.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	53.70 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Hängeeinheit Zylinderloch, Modell mit Feststellschrauben UCECH-Modell

  ASAHI SEIKO

  [Features]
  · The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	35.64 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Spannlager / MUC204 / Edelstahl / innen zylindrisch / Gewindestiftklemmung

  ASAHI SEIKO

  [Features]
  · Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	62.40 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rautenförmiges Flansch-Modell Exzenterrad Methoden rostfreier Edelstahl Silber Wirtschaftliche Serie

  ASAHI SEIKO

  [Features]
  · The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	64.33 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...