Rohrrahmen-Verbinder (Zubehör)（Modell：Zubehör Seite 3）

?* Informationen zur Lieferzeit und Preisen

• 

  Kunststoffteile GAP-8FN

  TMEH

  A plastic spacer for eliminating height differentials with the joint section when mounting shelf boards in pipe rack systems.
  [Features]
  · As well as eliminating height differentials, the flat section also sits onto the surface below, allowing it to receive ever wider surface areas.
  · Available in ivory (color) or gray.
  [Applications]
  · As a spacer for mounting boards and other flat objects.
  · Preventing middle pieces from bending or warping when mounting shelf boards and top shelf boards.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.70 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffteile GAPA-61

  TMEH

  Plastic parts that can be used as a guide when partitioning the frontages of a pipe rack system.
  [Features]
  · Can be fixed in position using a bolt.
  [Applications]
  · For inserting a partitioning guide onto shelves with wide frontages.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.62 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sicherheitskappe für ARG-4030BL

  TMEH

  A protective cap for use at the cut end of aluminum workpiece guide.
  [Features]
  · Mount on the cut end of the ARG-4030BL aluminum workpiece guide to protect against injury.
  · Two ASC-V30 and one ASC-H42L / ASC-H42R are required at both ends of a single workpiece guide.
  [Applications]
  · Ideal when using the ARG-4030BL.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	0.36 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Werkzeugkappe TC-28

  TMEH

  An urethane cap with drill hole for mounting to pipe ends.
  [Features]
  · Features a 19-mm drill hole at the center of the urethane cap.
  · Can be mounted to all pipes with a diameter of ø28.
  · Covers the cut end of the pipe to help protect against injury.
  [Applications]
  · Ideal when inserting tools or markers into pipes.
  · Ideal for preventing damage to cords or other objects when passing them through pipes.

  • Mengenrabatt

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	1.45 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ablagehalterung für hangeführte Schlagschrauber o.ä.

  TMEH

  A holder for impact drivers.
  [Features]
  · Mount to a pipe rack system using the GA-1S Metal Joint to hold your impact driver.
  · Simply insert your impact driver to hold it. This also makes it easy to take out.
  · Available either in a cylindrical shape or in a cut-away shape. Also available in nylon or steel.
  · Some impact drivers from certain manufacturers may not be held stably.
  [Applications]
  · Used when you want to hold impact drivers in a manner that makes them easy to retrieve.
  · Used by mounting to tool or storage benches.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	10.29 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hängehaken L PH-D

  TMEH

  A straight hook for hanging tools with hook holes in them.
  [Features]
  · Can be easily mounted to pipe racks and its position and mounting position fixed.
  · The hook is made of stainless steel and so does not easily rust, even in places where water is ever present.
  [Applications]
  · Used to hang and manage items such as tools on structures built using a pipe rack system.
  · Insert numbered cards and the like to store them.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	6.49 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stufen-Einstellvorrichtung DK-5

  TMEH

  A ladder-shaped fixture for adjusting the height of steps/stages.
  [Features]
  · Change the height of steps/stages by mounting 4 of these fixtures (2 at the back and 2 at the front).
  · The height can be raised or lowered at a pitch of 50 mm.
  · Inclines can be applied by changing the height individually at the front or back respectively.
  · To mount a single Step-Adjusting Fixture, 4 pcs of G-7AS, 2 sets of BN06 and 4 pcs of M8 nuts are required.
  [Applications]
  · Used when you want to have an easy way to change the height of work benches or shelves.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	28.46 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...